Analogue, Mixed Signal, LSI


SPST analog switches

25 February 2015 Analogue, Mixed Signal, LSI

Vishay introduced three new 200 Ω precision monolithic quad single-pole single-throw (SPST) analog switches in the ultra-compact WCSP 4 bump by 4 bump array package. The DG2501, DG2502 and DG2503 save space in wearable electronics and sensors, and consumer and communication devices while offering high precision characterised by low parasitic capacitance, charge injection and leakage current. With typical power consumption below 0,01 μW, the devices all feature four independently selectable SPST switches with closely matched channel resistance. The DG2501 is normally closed, while the DG2502 is normally open. The DG2503 has two normally open and two normally closed switches.

EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

KIOXIA pioneer new 3D Flash technology
EBV Electrolink DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation have pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.

Read more...
Super-fast H.264 encoder FPGA core
EBV Electrolink DSP, Micros & Memory
An ITAR-compliant H.264 core designed for AMD FPGAs provides baseline H.264 support and is currently the smallest and fastest FPGA core in the industry.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
Latest MotorXpert software drives FOC motors without shunts or sensors
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced MotorXpert v3.0, a software suite for configuration, control and sensing of BLDC inverters that utilise the company’s BridgeSwitch motor-driver ICs.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...
2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...
Dual-channel ADC for RF applications
RFiber Solutions Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.

Read more...
Powering the intelligent edge
EBV Electrolink AI & ML
STMicroelectronics released new devices from the second generation of its industrial MPUs, the STM32MP2 series, to drive future progress in smart factories, smart healthcare, smart buildings, and smart infrastructure.

Read more...