Power Electronics / Power Management


Power modules mount on PCB vertically and horizontally

4 June 2014 Power Electronics / Power Management

The primary switched PMAS5-S and PMAS-L families from MTM Power have been designed as compact universal power supplies with wide AC (90 – 264 V) and DC (100 – 353 V) input ranges for worldwide application. They offer constant 5 W output power and are available with the single output voltages of 3,3; 5; 12; 15 and 24 V d.c.

The devices are short circuit protected, require no ground load and feature reduced standby power consumption. With dimensions of 42,0 x 30,1 x 18,2 mm and thanks to vertical mounting, the PMAS5-S series are space-saving, as are the horizontal mounting models (PMAS5-L) at 42,6 x 32,6 x 17,0 mm. The modules are characterised by a compact and rugged design.

The power supplies are designed for PCB mounting and are vacuum encapsulated. They are prepared for applications in Class 1 and/or 2 and comply with the Low Voltage Directive as well as the up-to-date EN standards as regards CE conformity. Furthermore the modules are VDE as well as UL/cUL approved.

For more information contact Vepac Electronics, +27 (0)11 609 7122, [email protected], www.vepac.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...
High-voltage contactors
RS South Africa Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.

Read more...