Agilent Technologies introduced the InfiniiMax III+ differential probes, a new generation of 4 GHz, 8 GHz and 13 GHz differential active probes for general-purpose, high-speed differential bus probing. The company also introduced new QuickTip accessories for InfiniiMax probes to help engineers make quick and reliable measurements.
The new probes work with the full array of InfiniiMax III probe heads, including a wide range of solder-in probe heads, a browser head, ZIF (zero insertion force) tips, 2,92 mm/3,5 mm/SMA heads and the new QuickTip head. With a single connection, InfiniiMax III+ probes can be set to measure the differential signal, the single-ended A or B signals, and the common-mode component of a differential signal.
As with InfiniiMax III technology, the unique S-parameters of each InfiniiMax III+ probe amp are stored in the probe amp and are used with the S-parameters of the various probe heads to further flatten the magnitude and phase response of the probe for higher accuracy.
Three probe heads are available that support InfiniiMode measurements: the N2836A solder-in probe head, which provides the full 13 GHz bandwidth for all modes with low signal loading; the N2848A QuickTip probe head, which provides quick connect/disconnect capability; and the N5444A 2,92 mm/3,5 mm/SMA probe head for cabled connections, which provides full bandwidth measurement of all modes and the ability to terminate to a non-zero voltage.
The N2848A QuickTip probe head quickly snaps to the N2849A probe tip using a magnetic connection. Unlike implementations that use a magnet to mechanically hold together separate electrical contacts, the QuickTip design uses three small, gold-plated magnets as the actual contacts to gold-plated steel buttons on the probe tip. Multiple N2848A probe tips can be installed on a device under test, allowing quick and reliable measurements of many probe points.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Evolution of the connected healthcare system Concilium Technologies
Telecoms, Datacoms, Wireless, IoT
The combination of advances in the Internet of Things (IoT), artificial intelligence (AI), machine learning (ML), and cloud services impact the changes you see in healthcare today.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
printer friendly version