Power Electronics / Power Management


Eighth-brick DC-DC converters

21 August 2013 Power Electronics / Power Management

Murata has rolled out the UWE series of 100– 120 Watt open frame isolated DOSA-compatible eighth-brick DC-DC converters. Using the industry standard through-hole package measuring 58,42 x 22,86 x 9,91 mm, the single-output units offer nominal outputs of 3,3 V, 5 V or 12 V d.c.

Providing an efficiency of typically 91,5% means that for most applications no forced airflow is required; an optional baseplate is available for conduction cooled applications. Suiting embedded computing applications and instrumentation subsystems, the converters accommodate an ultra-wide 4:1 input voltage range from 18 to 75 V d.c. around a nominal 48 V d.c.

Line regulation is kept within ±0,25% Vout and load regulation is maximum ±0,2% Vout across the complete range. Onboard remote sense inputs compensate for line voltage errors at high output currents and a trim function provides the ability to adjust outputs within ±10% of nominal output voltage in order to compensate for line losses.

A remote on/off input, negative or positive, provides the ability to remotely control the converter such as required to schedule load startup. The UWE series can operate from –40°C to +85°C and features input to output isolation of 2250 V d.c. Protection features include input under-voltage, output short circuit, over-current and over-temperature.

For more information contact Erich Nast, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wine farm turns to solar installation for power
Current Automation Power Electronics / Power Management
Slanghoek Wine farm opted into a power purchase agreement to lower overall electricity costs and enter a true sustainable future, with a price-competitive edge on lower running costs.

Read more...
Industrial PSU family
Brabek Power Electronics / Power Management
The RACPRO1 family of PSUs supports a universal DC input voltage range from 430 to 850 V DC, allowing the parts to support renewable energy and microgrid applications.

Read more...
Integrated POL voltage regulators
EBV Electrolink Power Electronics / Power Management
Infineon’s TDA38807 and TDA38806 are their highest density high-efficiency integrated point-of-load (IPOL) solutions for smart enterprise systems.

Read more...
Hi-Rel quarter-brick converters
Accutronics Power Electronics / Power Management
Gaia Converter’s quarter-brick series DC-DC power modules provides output power levels ranging from 75 to 250 W in fixed output voltages.

Read more...
1700 V GaN Switcher IC
Future Electronics Power Electronics / Power Management
Power Integrations has introduced a new member of its InnoMux-2 family of single-stage regulated multi-output offline power supply ICs, the industry’s first 1700 V gallium nitride switch.

Read more...
How ADI battery management solutions empower safer, smarter robots
Altron Arrow Editor's Choice Power Electronics / Power Management
Choosing an appropriate battery pack and its accompanying battery management system is a critical decision in designing an autonomous mobile robot.

Read more...
Industrial power supply range
RFiber Solutions Power Electronics / Power Management
SynQor’s ruggedised AC-DC and DC-DC converters and filters are designed for a wide range of industrial applications, including those required to withstand harsh environments.

Read more...
PSUs for industrial applications
Power Electronics / Power Management
RECOM’s REDIIN120/240/480 series of AC-DC converters perfectly corresponds with customer needs by exhibiting high efficiency and low energy consumption at no load.

Read more...
Highest density automotive-grade power modules
Altron Arrow Power Electronics / Power Management
Vicor has released three automotive-grade power modules for 48 V EV systems, which deliver industry-leading power density.

Read more...
MOSFET for automotive applications
Altron Arrow Power Electronics / Power Management
Infineon’s OptiMOS 7 100 V is offered in the company’s versatile and robust, high-current SSO8 5 x 6 mm2 SMD package.

Read more...