Analogue, Mixed Signal, LSI


Clock buffer and divider

7 August 2013 Analogue, Mixed Signal, LSI

The AD9508 from Analog Devices is a clock buffer and divider IC that combines high speed, very low jitter (41 fs across the 12 kHz to 20 MHz band) and selectable division capability. The 1,65 GHz device is designed for communications, instrumentation, defence and aerospace equipment that requires ultra-high-speed data conversion with optimum signal-to-noise ratio performance.

The IC has four dedicated output dividers with bus-programmable division (integers up to 1024) and phase delay, and automatic synchronisation. The dividers also have pin-strapping capability for hardwired programming at system power-up.

The AD9508 supports up to four differential or eight single-ended outputs and three logic levels: LVDS (1,65 GHz), HSTL (1,65 GHz) and CMOS (250 MHz).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-efficiency buck-boost converter
Altron Arrow Power Electronics / Power Management
The MAX77859 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range.

Read more...
Low-cost i.MX development board
Altron Arrow DSP, Micros & Memory
The FRDM i.MX 93 development board from NXP is a low-cost and compact development board featuring the i.MX93 applications processor.

Read more...
Ultrawideband Low Noise Amplifier
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ADL8101 is an ultrawideband, low noise amplifier that operates from 10 kHz to 22 GHz with typical gain and noise figure of 14 dB and 3,5 dB respectively.

Read more...
Ryzen-based computer on module
Altron Arrow AI & ML
SolidRun announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.

Read more...
Robust and customisable SBC
Altron Arrow DSP, Micros & Memory
Pairing the powerful i.MX8M Plus System on Module (SoM) from SolidRun, which features the i.MX 8M Plus SoC from NXP, this high-performance SBC is set to transform industrial environments.

Read more...
New family supports future cryptography
Altron Arrow DSP, Micros & Memory
NXP has introduced its new i.MX 94 family, which contains an i.MX MPU with an integrated time-sensitive networking (TSN) switch, enabling configurable, secure communications with rich protocol support in industrial and automotive environments.

Read more...
NXP’s all-purpose microcontroller series
Altron Arrow DSP, Micros & Memory
NXP has released its MCX A14x and A15x series of all-purpose microcontrollers which are part of the larger MCX portfolio that shares a common Arm Cortex-M33 core platform.

Read more...
Non-terrestrial network module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.

Read more...
Cellular IoT connectivity via satellite
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.

Read more...
Low noise 3-axis MEMS accelerometers
Altron Arrow DSP, Micros & Memory
The ADXL357 and ADXL357B from Analog Devices are digital outputs, low noise density, low 0 g offset drift, low power, three-axis accelerometers with selectable measurement ranges.

Read more...