Power Electronics / Power Management


Voltage supervisor

10 July 2013 Power Electronics / Power Management

New from Micrel is the MIC826 voltage supervisor with ±0,5% accuracy, manual reset input, watchdog timer and dual outputs in a 1,6 x 1,6 mm thin DFN package. It offers eight reset threshold options and is intended to monitor 1,8 V to 5 V power supplies. The device features ±0,5% voltage threshold accuracy at room temperature and ±1,5% over the -40°C to +125°C temperature range. The solution consumes just 3,8 μA of supply current for power supplies; lower than 3,6 V and 4,8 μA for solutions operating from a 5 V power supply. The IC also features an industry standard reset timeout period of 140 ms (minimum) and a watchdog time output period of 1,6 s, as well as dual, active-high push-pull and active-low push-pull reset outputs.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Zero drift current shunt monitors
Altron Arrow Power Electronics / Power Management
The NCS21671 and NCV21671 from onsemi are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V.

Read more...
Schneider Electric partners with Drakenstein Municipality
Schneider Electric South Africa Power Electronics / Power Management
Drakenstein Municipality, situated in Paarl in the Western Cape, is one of the first distribution utilities globally to implement Schneider Electric’s green, SF6-free RM AirSeT switchgear with pure air technology and native digital connectivity.

Read more...
E-Mobility: navigate safety, interoperability and conformance
Concilium Technologies Power Electronics / Power Management
Although the concept of electric vehicles is not a new one, the market remains in its infancy, and is not well-regulated or fully operational. This presents a number of challenges for manufacturers throughout the EV and EVSE ecosystem.

Read more...
Webinar: Decarbonise with industrial drives
Power Electronics / Power Management
Infineon's TRENCHSTOP IGBT7 and CoolSiC technologies increase the efficiency of your industrial drive design, ultimately resulting in cost savings for you, and a more sustainable future for all.

Read more...
Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Banana Pi with NPU
CST Electronics AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.

Read more...
Compact PCB-mount SMPS
RS South Africa Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.

Read more...
AC-DC brick PSU
Conical Technologies Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.

Read more...
5 kW switching PSU range
Conical Technologies Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.

Read more...