Diamond Systems recently premiered its Hercules III, a rugged EBX single board computer (SBC) based on the Intel Atom E680T CPU running at 1,6 GHz, and featuring 2 Gigabit Ethernet ports, six serial ports and five USB 2.0 ports.
Hercules III is the newest member of Diamond’s 2-in-1 SBC products, combining a standard CPU board’s features with enhanced data acquisition on a single board. Its power-efficient design leverages Intel’s Queensbay silicon platform, consisting of the Atom E680T (Tunnel Creek) processor and chipset (Topcliff). The board supports 1 GB or 2 GB of onboard SDRAM and provides high-resolution LVDS and VGA graphics interfaces.
Additional I/O ports include SATA, CANbus, USB, serial, digital I/O and Gigabit Ethernet. Flexible system expansion is based on stackable PC/104-Plus (ISA + PCI) modules. mSATA, PCIe MiniCard and GPS modem sockets are provided for optional onboard storage and I/O. Hercules III also provides a wide-voltage power supply, accepting 7-40 V d.c. input and producing 35 W of available power for add-on boards or devices.
Integrated data acquisition circuitry includes 32 analog inputs with 16-bit A/D and 250 kHz maximum sample rate, four 12-bit analog outputs, 40 digital I/O lines and two counter/timers. It uses an enhanced 2048-sample FIFO with programmable threshold for optimum flexibility and data reliability.
The analog circuitry utilises Diamond Systems’ Universal Driver software with auto-calibration technology to calibrate A/D and D/A circuits. This provides analog I/O performance with the maximum possible accuracy over the full operating temperature range of the product.
Hercules III’s rugged features include a wide temperature operating range of -40°C to +85°C, plus dedicated locations on the PCB to replace configuration jumpers with 0-ohm resistors for resistance to shock and vibration. Conformal coating is also available as an added cost option.
Hercules III is mechanically and functionally backward compatible with Diamond’s Hercules II SBC, while offering almost three times the performance, lower power consumption and upgraded features.
Generate waveforms at 10 GS/s Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...Quad-port 10GBASE-T controller Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...IoT gateways Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...Keeping it cool within the edge data centre
Computer/Embedded Technology
The creation of more data brings with it the corresponding need for more compute power and more data centres, which, in turn, can create unique challenges with regards to securing the environment and cooling the IT loads.
Read more...NEX XON becomes Fortinet partner NEC XON
Computer/Embedded Technology
This designation demonstrates NEC XON’s ability to expertly deploy, operate, and maintain its own end-to-end security solutions, helping organisations to achieve digital acceleration.
Read more...Online tool for data centre planning and design
Computer/Embedded Technology
Vertiv has unveiled a new tool, Vertiv Modular Designer Lite, designed to transform and simplify the configuration of prefabricated modular (PFM) data centres.
Read more...Mission computer for HADES Rugged Interconnect Technologies
Computer/Embedded Technology
North Atlantic Industries’ latest product, the SIU34S, has been selected as the mission computer for the High Accuracy Detection and Exploitation System (HADES) program.
Read more...14th Gen power to boost AI at the edge Rugged Interconnect Technologies
Computer/Embedded Technology
ADLINK’s inclusion of Intel’s 14th generation Core processors into its latest embedded boards and fanless computers is set to boost the AI and graphics capabilities.
printer friendly version