Fluke’s CNX range is a customisable, troubleshooting set of wireless test tools that work together, recording live measurements remotely and simultaneously on a single screen. CNX modules measure AC voltage, temperature and AC current with a standard clamp or flex clamp. Possible applications include detection of power interruptions, single phase measurement, determining current imbalance and measurement of incoming current.
A wireless multimeter displays readings from up to three wireless modules, plus the meter measurement at the same time, on the same screen, from as far as 20 metres away. To get a holistic overview of the situation, readings from 10 tools’ measurements can be reviewed simultaneously on PC View software. Users are able to mix and match the wireless-enabled modules to suit their unique measurement needs.
The CNX system can record up to 65 000 sets of min/max/avg readings in either single or multiple logging sessions. CNX isolates intermittent events or records signal fluctuations automatically, using the module’s log function. Measurements can be viewed in a location separate from the point of measurement, for safety purposes, as well as be viewed repeatedly from either remote locations or on-site.
Fluke CNX meets Category 1000 V CAT III and Category IV 600 V safety standards.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Comtest introduces Ametek’s Mi-BEAM series Comtest
Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.
printer friendly version