MIL-STD-1553 network analyser

23 January 2013 Test & Measurement

Rohde & Schwarz has enhanced its SGS100A vector signal generator by adding a model for I/Q modulated signals from 80 MHz to 12,75 GHz. Combined with an I/Q baseband generator, the instrument can be used to generate test signals for all radio standards in this frequency range. As a result, it is ideal for X-band signals from 8 GHz to 12 GHz for radar and satellite communications.

The I/Q modulator’s wide RF bandwidth of 1 GHz makes it possible to generate pulses with high chirp bandwidths and steep pulse edges. Designed for use in automatic test systems, the compact system (one unit high and half of 19” in width) delivers excellent performance across the entire frequency range up to 12,75 GHz.

All models can switch between the wanted frequency and level settings in only 280 μs. They offer a high output level of +22 dBm as standard and have an electronic step attenuator covering the entire frequency range. The generator boasts high reference frequencies of 100 MHz and 1 GHz, which ensures excellent phase stability for phase-coupled applications involving multiple signal generators.

For more information contact Trevor Grundlingh, Protea Electronics, +27 (0)11 719 5700, [email protected], www.protea.co.za

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...

---

AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...

---

QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...

---

Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...

---

High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...

---

Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...

---

Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...

---

Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...

---

Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...

---

Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...

---