Analogue, Mixed Signal, LSI


USB-to-I²S audio bridge chip

28 November 2012 Analogue, Mixed Signal, LSI

Silicon Laboratories has introduced a crystal-less USB-to-I²S audio bridge designed to support a wide range of codecs and digital-to-analog converters (DACs) used in USB-based audio applications.

The chip simplifies the process of transferring audio data from USB to I²S without time-consuming code development, speeding time to market for USB audio accessories such as speakers, headphones, music boxes, point-of-sale terminals, navigation systems and VoIP systems.

USB system development often involves significant expertise, design effort and cost to overcome implementation issues ranging from compatibility to poor performance. USB-to-I²S audio data transfer also requires sophisticated clock synchronisation, which poses complex development challenges. To address these needs, the CP2114 provides a highly integrated, plug-and-play solution for streaming audio between USB and I²S.

The IC integrates a USB 2.0 full-speed function controller, a USB transceiver, crystal-less oscillator, one-time programmable ROM, UART, IIC and I²S interface. It requires no external memory when combined with a codec or DAC, further minimising system BOM cost.

The device supports multiple mainstream DACs and codecs from Wolfson Microelectronics, Cirrus Logic and Texas Instruments, giving customers the flexibility to implement their own preferred audio chipset solution. Silicon Labs offers evaluation kits pre-populated with these popular DAC and codec platforms to further speed design time.

The CP2114 uses the standard USB audio device class that is natively supported by most operating systems, eliminating the need to develop and install custom USB software drivers. Host programming capabilities also enable developers to configure practically any external codec or DAC and perform in-field upgrades.

For more information contact Gary de Klerk, NuVision Electronics, +27 (0)11 608 0144, [email protected], www.nuvisionelec.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...
Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...
Low power, low-noise amplifier
Altron Arrow Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.

Read more...
QLC Flash memory with the latest BiCS technology
EBV Electrolink Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.

Read more...
Precision op-amp
Altron Arrow Analogue, Mixed Signal, LSI
The ADA4099-1 and ADA4099-2 are single/dual robust, precision, rail-to-rail input/output operational amplifiers with inputs that operate from -VS to +VS and beyond, which is referred to as Over-The-Top.

Read more...
Large memory footprint MCU
NuVision Electronics DSP, Micros & Memory
PG26 32-bit MCUs are ideal for enabling a wide range of low-power and high-performance embedded IoT applications.

Read more...
Adaptive computing for big data sets
NuVision Electronics Computer/Embedded Technology
The new AMD Alveo V80 compute accelerator, powered by the AMD Versal HBM adaptive SoC, is built for memory-intensive workloads in HPC, data analytics, network security, storage acceleration, and financial technology.

Read more...