Multiple-channel switching ICs
25 July 2012
Analogue, Mixed Signal, LSI
ON Semiconductor offers two new multiple-channel differential switching ICs in single-pole, double-throw (SPDT) switch configurations for high-frequency signals such as PCI Express 3.0 and DisplayPort 1.2 I/O. The NCN3612B is a 6-channel differential SPDT switch that supports 8 Gbps data transfer with an on-state capacitance (CON) of 2,1 pF and an on-state resistance (RDSON) of 8 Ω. This is complemented by the NCN3411, which is a 4-channel differential switch also capable of supporting 8 Gbps operation. It has CON of 2 pF and RDSON of 7,5 Ω.
The NCN3612B has a power supply voltage range of 3 to 3,6 V and draws a supply current of just 250 μA, while the NCN3411 has a power supply voltage range of 1,5 V to 2,0 V and draws a supply current of 200 μA.
Further reading:
A new era in modular I/O solutions
Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...
High voltage instrument op-amp
iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...
High-speed SAR ADC simplifies design
Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...
2-wire quad voltage output DAC
Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...
Dual-channel ADC for RF applications
RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...
Infineon launches Edge Ai software solution
Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...
16-bit voltage output denseDAC
Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...
AFE enables the software-defined factory
Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...
Precision voltage reference
Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...
Microphones enable low-power always-on state
Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...
printer friendly version