Power Electronics / Power Management


15 W DC-DC converters

11 July 2012 Power Electronics / Power Management

XP Power announced two new families of metal-cased 15 W DC-DC converters. Available in an industry standard 24 pin DIP measuring 31,75 x 20,32 x 10,16 mm, the JCG15 and JTF15 series offer a power density of up to 2,29 W per cm³. with an efficiency of up to 91%.

Providing the popular nominal inputs of +12, +24 or +48 V d.c., the JCG15 series accommodates 2:1 input ranges of 9 to 18 V d.c., 18 to 36 V d.c. and 36 to 75 V d.c., with the JTF15 accepting 4:1 inputs of 9 to 36 V d.c. and 18 to 75 V d.c. Both single- and dual-output models are available. Single outputs are +3,3, +5,1, +12 or +15 V d.c. and duals are ±5, ±12 or ±15 V d.c.

The converters have an input to output and input/output to case isolation of 1600 V d.c. A remote on/off signal control is standard across the range and can be used to control the output rails or to sequence startup procedures. All units feature over-voltage and continuous short circuit protection. They operate from


-40°C to +100°C for the JCG series and +105°C for the JTF series.

For more information contact Edwin Brown, Vepac Electronics, +27 (0)11 609 7122, [email protected], www.vepac.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...
High-voltage contactors
RS South Africa Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.

Read more...