Test & Measurement


Cylindrical proximity sensors

27 June 2012 Test & Measurement

The Omron E2A series of cylindrical proximity sensors is designed for use in robotics and industrial equipment. They use a modular construction which allows a large range of flexible product options and customisation, whilst the sensors’ durability provides extra long life support against the demands of daily use.

The sensors, in DC 3-wire and DC 2-wire models, enable safe mounting with a long sensing distance up to 30 mm – up to twice that of conventional Omron sensors. This helps prevent problems such as the collision of work pieces. A full range of standard sizes is available including M8, M12, M18 and M30.

Cylindrical proximity sensors use high-frequency oscillation to detect both ferrous and non-ferrous metal objects, and in capacitive models to detect non-metal objects. They also resist heat, chemicals and water better than rectangular sensors. The E2A series is IP67 and IP69k compliant for the highest protection in wet environments.

For more information contact Electrocomp Express, 0860 10 20 20, [email protected], www.eexpress.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...
QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...
Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...
High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...
Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...
Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...
Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...
Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...
Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...