Analogue, Mixed Signal, LSI


Voltage-level translator for SD 3.0

7 March 2012 Analogue, Mixed Signal, LSI

New from STMicroelectronics is a voltage-level translator compliant with the latest SD (Secure Digital) 3.0 standard.

The increase in storage capacity and access speed of SD 3.0, together with the low static power consumption and small package size of ST’s new level translator, make it a suitable choice for interfacing application processors or digital basebands to SD memory cards. The SD 3.0 specification provides up to 2 Terabytes of storage capacity and accelerates SD interface read/write speeds to 50 Megabytes per second, at 50 MHz double data rate.

The ST6G3244 couples high-speed operation with very low power dissipation, supported with a power-down mode. Data integrity is secured through balanced propagation delays and electromagnetic interference filters and signal conditioning. Recommended for portable devices that connect directly to the external memory card, the device incorporates 15 kV air-gap electrostatic discharge protection on the card side.

ST’s selectable-supply (1,8 V or 2,9 V), 6-bit bidirectional CMOS-level translator for SD, mini-SD and micro-SD memory cards is offered in a space-saving BGA25 package. It is backward pin-to-pin compatible with most existing SD 2.0 products, so customers can easily ‘hot swap’ and protect their investment in application development.

For more information contact Marthinus Harmse, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ryzen-based computer on module
Altron Arrow AI & ML
SolidRun announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.

Read more...
Robust and customisable SBC
Altron Arrow DSP, Micros & Memory
Pairing the powerful i.MX8M Plus System on Module (SoM) from SolidRun, which features the i.MX 8M Plus SoC from NXP, this high-performance SBC is set to transform industrial environments.

Read more...
New family supports future cryptography
Altron Arrow DSP, Micros & Memory
NXP has introduced its new i.MX 94 family, which contains an i.MX MPU with an integrated time-sensitive networking (TSN) switch, enabling configurable, secure communications with rich protocol support in industrial and automotive environments.

Read more...
NXP’s all-purpose microcontroller series
Altron Arrow DSP, Micros & Memory
NXP has released its MCX A14x and A15x series of all-purpose microcontrollers which are part of the larger MCX portfolio that shares a common Arm Cortex-M33 core platform.

Read more...
Non-terrestrial network module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.

Read more...
Cellular IoT connectivity via satellite
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.

Read more...
Low noise 3-axis MEMS accelerometers
Altron Arrow DSP, Micros & Memory
The ADXL357 and ADXL357B from Analog Devices are digital outputs, low noise density, low 0 g offset drift, low power, three-axis accelerometers with selectable measurement ranges.

Read more...
Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
Cree: Illuminating the future of LED technology
Altron Arrow Editor's Choice Opto-Electronics
As a pioneer in this field, Cree LED has been instrumental in shaping the LED landscape, driving innovation and performance in this sector.

Read more...
Ultra-wideband LNA
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ADL8120 from Analog Devices is an ultra-wideband low-noise amplifier that operates from 30 kHz to 20 GHz, with typical gain and noise figure of 14 dB and 1,9 dB.

Read more...