TDK-Lambda has expanded the HFE series of 1U high, single-output AC-DC hot swap, front end power supplies with the addition of 2,5 kW models. Offering power density of 1,77 W/cm³, the power supply is equally well suited for 2,5 kW bulk power and distributed power architecture (DPA) applications. All models feature full current sharing capabilities and internal ORing MOSFET for isolation to support hot swap and redundancy applications such as those found in servers, datacom, data storage, communications, broadcast, military (COTS), medical, process control and industrial automation.
Operating from a universal 85 to 265 V a.c. input, the HFE2500 features efficiency of up to 93% and up to ±20% output voltage adjustment. Output voltage is programmable by resistance, external voltage or optional PMBus compatible I²C communication interface. Output current is external voltage or optional PMBus programmable.
The HFE2500-12, -24 and -48 power supplies, with dimensions of 325 x 107 x 41 mm, can be used individually or up to four units can be mounted into a dedicated 1U rack delivering 10 kW. A total of eight units can be configured in parallel to form a hot swap N+1 redundant power system with single-wire current sharing. A keying system prevents misinsertion of modules into adjacent racks of differing voltage. Each power supply has variable-speed, temperature-controlled cooling fans and can operate in temperatures ranging from -10°C to +70°C.
Over-voltage, over-current and over-temperature are standard protection features. For system monitoring, there are signal returns for DC OK, AC fail, over-temperature and PS exist. Remote ON/OFF control and remote sense are included. Monitoring is also available via the optional PMBus compatible I²C interface and includes a fan fail alarm.
Generate waveforms at 10 GS/s Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...Wine farm turns to solar installation for power Current Automation
Power Electronics / Power Management
Slanghoek Wine farm opted into a power purchase agreement to lower overall electricity costs and enter a true sustainable future, with a price-competitive edge on lower running costs.
Read more...60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...Industrial PSU family Brabek
Power Electronics / Power Management
The RACPRO1 family of PSUs supports a universal DC input voltage range from 430 to 850 V DC, allowing the parts to support renewable energy and microgrid applications.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Integrated POL voltage regulators EBV Electrolink
Power Electronics / Power Management
Infineon’s TDA38807 and TDA38806 are their highest density high-efficiency integrated point-of-load (IPOL) solutions for smart enterprise systems.
Read more...Hi-Rel quarter-brick converters Accutronics
Power Electronics / Power Management
Gaia Converter’s quarter-brick series DC-DC power modules provides output power levels ranging from 75 to 250 W in fixed output voltages.
Read more...1700 V GaN Switcher IC Future Electronics
Power Electronics / Power Management
Power Integrations has introduced a new member of its InnoMux-2 family of single-stage regulated multi-output offline power supply ICs, the industry’s first 1700 V gallium nitride switch.
Read more...SBC with Intel N-series processor Vepac Electronics
Editor's Choice
The UP 710S represents the evolution of the credit card-sized form factor, adding new, sought-after features and performance.
printer friendly version