Analogue, Mixed Signal, LSI


Small TCXOs up to 100 MHz

22 February 2012 Analogue, Mixed Signal, LSI

KVG’s new (VC)TCXO series TO-75000 offers frequencies starting from 40 MHz in the 7 x 5 mm SMD package.

The parts provide frequencies up to 100 MHz and tight frequency stability options of ±0,5 ppm are possible over an operating temperature range of -30°C to +85°C. The typical phase noise of a 50 MHz TO-75000 at 100 Hz carrier offset is below -105 dBc/Hz. The typical noise floor at 100 kHz is below -150 dBc/Hz.

Supply voltage can be selected as +2,5 V or +3,3 V. Output options are clipped sine wave, HCMOS or sine wave. The TO-75000 can be provided as a fixed-frequency TCXO or as a voltage controlled VC-TCXO with a tuning range of up to ±15 ppm. Typical applications are network and synchronisation components and systems for professional telecommunication and measurement equipment and systems for network monitoring.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
Clearing the Static: Key principles of ESD control in electronics manufacturing
Actum Electronics Circuit & System Protection
Effectively managing electrostatic discharge is essential in electronics manufacturing to ensure not only product reliability, but also worker safety.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
Clearing the Static: Three steps for a dry ESD packaging system
Actum Electronics Circuit & System Protection
For optimal storage, it’s essential to complete the dry-packaging system by adding Desiccant Packs and Humidity Indicator Cards.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
Clearing the Static: Ionisation equipment
Actum Electronics Circuit & System Protection
Electrostatic discharge (ESD) ionisation equipment is designed to neutralise static charges that accumulate on surfaces in environments where ESD-sensitive components or materials are handled. These ...

Read more...
Clearing the Static: How to protect PCBs from electrostatic discharge and moisture
Actum Electronics Circuit & System Protection
Printed circuit boards (PCBs) are essential components in most electronic devices. They are sensitive to environmental factors like electrostatic discharge (ESD) and moisture, which can cause significant ...

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...
Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...
Low power, low-noise amplifier
Altron Arrow Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.

Read more...