Texas Instruments has introduced an automotive qualified 36 V, single-supply op-amp (operational amplifier) that can operate on supplies ranging from +2,7 V to +36 V. The OPA171-Q1 offers high-precision performance and its SOT-553 micro package can reduce board space for automotive applications including HEV/EV, tracking amplifiers in power modules, and transducer amplifiers.
The IC offers features designed to enhance overall system design stability, such as the ability to handle input signals beyond the supply rails without causing output phase reversal. It remains stable when exposed to capacitive loads up to 300 pF or when the input operates 100 mV below the negative rail and within 2 V of the top rail during normal operation.
The OPA171-Q1’s dynamic input voltage range of +2,7 V to +36 V or ±1,35 V to ±18 V allows for greater design versatility across varying supply rails, while still enabling precise, low-voltage sensor outputs. The device provides low offset of up to 1,8 mV, typical drift of 0,3 μV/C and gain bandwidth of 3 MHz. Low quiescent current of 475 μA enables efficient battery-powered operation.
KIOXIA pioneer new 3D Flash technology EBV Electrolink
DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation have pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.
Read more...Super-fast H.264 encoder FPGA core EBV Electrolink
DSP, Micros & Memory
An ITAR-compliant H.264 core designed for AMD FPGAs provides baseline H.264 support and is currently the smallest and fastest FPGA core in the industry.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...Power IC supplies 1650 W EBV Electrolink
Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...Powering the intelligent edge EBV Electrolink
AI & ML
STMicroelectronics released new devices from the second generation of its industrial MPUs, the STM32MP2 series, to drive future progress in smart factories, smart healthcare, smart buildings, and smart infrastructure.
printer friendly version