The new 100 V LDO and 60 V DC/DC controller can withstand high-voltage transients while maintaining high efficiency – providing peace of mind to designers of low- to mid-current, high-voltage telecom and industrial designs, such as motor control, HVAC relay, smart meters and automotive after-market applications.
The TPS7A4001 50 mA LDO has an input voltage range of 7 V to 100 V, and achieves a very fast settling time of less than 500 nanoseconds for a 50 V transient event. The device, which comes in an 8-pin, thermally enhanced 3 x 5 mm MSOP package, has a low quiescent current of 25 μA and ensures output accuracy in a noisy environment.
The TPS40170 synchronous step-down DC/DC controller offers voltage-mode control with input voltage feed-forward compensation, while supporting input voltages from 4,5 V to 60 V and output currents up to 12 A. The controller protects against voltage spikes up to 62 V, offers a fast FET on-time of 75 ns and shutdown current of 1,0 μA. The TPS40170’s bidirectional synchronisation feature eliminates system beat and EMI noise and reduces input capacitance by up to 50%, saving board space. The device comes in a 3,5 x 4,5 mm QFN, and has samples and evaluation modules available.
In addition to the TPS40170 controller, TI provides a range of SWIFT monolithic switchers with integrated FETs to simplify design in lower-current 60 V applications.
The 2,5 A TPS54260, 1,5 A TPS54160 and 500 mA TPS54060 converters provide up to 95% efficiency to 12, 24 and 48 V industrial and commercial designs and GSM/GPRS modules used in smart meters, fleet management and security systems. All three SWIFT converters are pin-compatible for design flexibility.
RF arrestor provides robust protection RFiber Solutions
Power Electronics / Power Management
NexTek’s range of coaxial RF surge and lightning arrestors are designed and built to provide robust protection for any radio or coaxial RF transmission application.
Read more...Wide-Bandgap Developer Forum 2025
Power Electronics / Power Management
To give designers the ultimate in design flexibility, the entire range of WBG power semiconductors will be provided including discretes, modules, and highly integrated solutions ranging from 40 V to 700 V for GaN and 400 V to 3,3 kV for SiC.
Read more...New 5 kW and 8 kW hybrid inverters Current Automation
Power Electronics / Power Management
Switching time from on-grid to off-grid mode is a rapid 5 ms allowing for protection of sensitive electronic equipment.
Read more...Power relays for energy management applications Future Electronics
Power Electronics / Power Management
The Panasonic Industry HE-R Series is an energy management relay designed for single-phase or 3-phase AC charging units, combining high capacity, high switching, and low operating power into a small size power relay.
Read more...Programmable switching DC PSU series Vepac Electronics
Power Electronics / Power Management
The SPS6000X Series from Siglent is a programmable switching DC power supply with a wide range of single output and constant power features.
Read more...Tiny MLCCs at 1250 V RS South Africa
Power Electronics / Power Management
TDK Corporation has expanded its CGA series for automotive and C series for commercial multilayer ceramic capacitors to 10 nF at 1250 V in 3225 size.
Read more...PMIC extends life of BLE products Avnet Silica
Power Electronics / Power Management
Nordic Semiconductor’s nPM2100 PMIC incorporates an ultra-efficient boost regulator and a wide range of energy-saving features to significantly extend operating time in non-rechargeable battery applications.
Read more...PCB-mount 40 W converter Vepac Electronics
Power Electronics / Power Management
With an ultra-compact 2,5 x 2,5 mm package and a high-power density of 93 W/in3, these converters are optimised for efficiency and space-saving designs.
Read more...Upgraded multiphase power inductor iCorp Technologies
Power Electronics / Power Management
The increased demand for computing power in data centres has resulted in the development of multi-phase ultra-low profile, ultra-high current copper magnetic co-fired power inductors.
printer friendly version