Single-board computers
30 March 2011
Computer/Embedded Technology
Concurrent Technologies has released new 3U OpenVPX and 6U VXS embedded single-board computers (SBCs) featuring the second generation Intel Core processor and Intel 6 series chipsets.
The TR 80x/39x (3U OpenVPX SBC) features the enhanced processing and graphics performance of the quad-core Intel Core i7-2715QE processor and the dual-core Intel Core i5-2515E processor while maintaining the power consumption of the previous Intel Core processors. It provides up to 8 GByte of ECC DDR3 SDRAM, configurable PCI Express fabric interface supporting 1 x8, 2 x4, 1 x4 + 1 x4 at Gen 1 or Gen 2 data rates, dual Gigabit Ethernet or dual 1000Base-BX channels, dual SATA600, single XMC slot, serial RS232/422/485 port, dual USB 2.0 ports, independent VGA and display port.
The Intel Core micro architecture virtually doubles graphics performance of previous architectures and when complemented by support for Intel Turbo Boost technology capabilities and media acceleration, the TR 80x/39x offers technology suitable for security, transportation, military and embedded systems.
It is available in three temperature grades: 0°C to +55°C (N-series), -25°C to +70°C (E-series) and -40°C to +85°C (K-series). For extremely rugged applications, the TR 80x/39x is available in VPX-REDI variants (type 1 and type 2).
The VX 81x/09x is a 6U VXS SBC fully compliant with the VITA 41.x standard. It features the processing and graphics performance of the quad-core Intel Core i7-2715QE processor or the dual-core Intel Core i5-2515E processor. The board supports SATA600, PCI Express Gen 2, Intel Turbo Boost technology capabilities and media acceleration. It offers up to 16 GByte of ECC DDR3 SDRAM, configurable PCI Express fabric interface supporting 1 x8, 2 x4, 1 x4 + 1 x4 at Gen 1 or Gen 2 data rates, dual Gigabit Ethernet, dual SATA600, dual PMC/XMC slots, dual serial RS232/422/485 ports, six USB 2.0 ports, dual independent display ports, onboard CompactFlash and optional 2,5 inch hard drive.
The VX 81x/09x is available in three temperature grades: 0°C to +55°C (N-series), -25°C to +70°C (E-series), -40°C to +85°C (K-Series) and two ruggedised grades: Ruggedised Conduction-Cooled -40°C to +85°C (RC), Ruggedised Air-Cooled -40°C to +75°C (RA).
Operating systems currently supported for the release of the TR 80x/39x and VX 81x/09x are Windows 7, Windows XP, Windows Embedded Standard 7, Linux and VxWorks.
For more information contact Redlinx Embedded Solutions, 0861 REDLNX, [email protected], www.redlinx.co.za
Further reading:
Generate waveforms at 10 GS/s
Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...
Quad-port 10GBASE-T controller
Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...
HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...
IoT gateways
Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...
1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...
Keeping it cool within the edge data centre
Computer/Embedded Technology
The creation of more data brings with it the corresponding need for more compute power and more data centres, which, in turn, can create unique challenges with regards to securing the environment and cooling the IT loads.
Read more...
NEX XON becomes Fortinet partner
NEC XON
Computer/Embedded Technology
This designation demonstrates NEC XON’s ability to expertly deploy, operate, and maintain its own end-to-end security solutions, helping organisations to achieve digital acceleration.
Read more...
Online tool for data centre planning and design
Computer/Embedded Technology
Vertiv has unveiled a new tool, Vertiv Modular Designer Lite, designed to transform and simplify the configuration of prefabricated modular (PFM) data centres.
Read more...
Mission computer for HADES
Rugged Interconnect Technologies
Computer/Embedded Technology
North Atlantic Industries’ latest product, the SIU34S, has been selected as the mission computer for the High Accuracy Detection and Exploitation System (HADES) program.
Read more...
14th Gen power to boost AI at the edge
Rugged Interconnect Technologies
Computer/Embedded Technology
ADLINK’s inclusion of Intel’s 14th generation Core processors into its latest embedded boards and fanless computers is set to boost the AI and graphics capabilities.
Read more...
printer friendly version