Handheld cable and antenna analyser

19 January 2011 Test & Measurement

The ZVH from Rohde & Schwarz is a portable cable and antenna analyser especially designed to facilitate the installation of antenna stations.

Convenient wizards help users measure antenna cables, filters and amplifiers, and documentation is enabled by simple tools for generating test reports. Two frequency ranges, from 300 kHz to 3,6 GHz or 8 GHz, are provided to help network operators, infrastructure manufacturers and their service providers install and maintain mobile radio antennas.

The built-in wizards allow even users who have no experience with test and measurement equipment to, for example, check cable faults using the distance-to-fault (DTF) measurement or measure antenna matching and isolation. Network operators can adapt the wizards in the lab to their individual test report formats and make them available to their service providers for use at the antenna site. Predefined test reports in various file formats make it easy to demonstrate that assignments were properly executed.

The ZVH has a dynamic range of 100 dB, easily fulfilling the manufacturer’s guidelines of >90 dB required for repeater measurements. The handheld analyser replaces conventional test setups consisting of a signal generator and a spectrum analyser. The built-in DC bias supplies power to active DUTs, such as amplifiers, at both test ports via the RF cable. This function is especially useful for tower-mounted amplifiers (TMA).

For more information contact Trevor Grundlingh, Protea Electronics, +27 (0)11 719 5700, [email protected], www.protea.co.za

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...

---

AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...

---

QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...

---

Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...

---

High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...

---

Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...

---

Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...

---

Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...

---

Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...

---

Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...

---