Telecoms, Datacoms, Wireless, IoT


Multiprotocol serial transceiver

19 January 2011 Telecoms, Datacoms, Wireless, IoT

Exar has added another versatile device to its single-chip RS232/RS485/RS422 product family. Featuring 15 kV ESD protection and operating from 3,3 V to 5 V, the SP337 is suitable for factory automation, process controls, embedded PCs, security networks, point-of-sales equipment, and other applications requiring use of both RS232 and RS485 protocols. The device offers full support for the DB9 serial port connector, and its RS232 mode provides three drivers and five receivers to enable all eight signals required for DB9 (3TX/5RX). The RS485 mode includes two independent high-speed RS485/422 full duplex transmit and receive channels (2TX/2RX).

The SP337 has a high input impedance for up to 256 transceivers on the serial communication bus (1/8th unit load), enhanced failsafe protection, and is available in two RS232 speed grades: 1 Mbps (SP337EU), and slew limited 256 Kbps (SP337EB). Both EU and EB parts offer 15 Mbps in RS485 mode. A single pin toggles between modes, allowing easy programmability. Products are available in commercial (0 to +70°C) and industrial (-40 to +85°C) operating temperature grades. All bus pins are protected against severe ESD events up to ±15 kV (human body model).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quectel increases its IoT antenna range
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel has expanded its IoT antenna portfolio with six new 4G and 5G antennas that cover a wide range of use cases.

Read more...
Webinar: Game-changing Matter standard
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
Join Infineon for an exclusive one-hour webinar with EBV Elektronik, exploring the groundbreaking Matter standard, and its profound implications for the future of smart homes.

Read more...
Wi-Fi 6/BLE module enables rapid development
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.

Read more...
Low phase noise amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.

Read more...
Webinar: Enabling the digital transformation of IIoT with Bluetooth
Telecoms, Datacoms, Wireless, IoT
Key industrial use cases for Bluetooth will be reviewed, including the main performance requirements for Bluetooth in industrial applications, and the technical features available.

Read more...
Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...