Comtest Technologies has released Fluke’s 5500E entry-point multiproduct calibrator to the South African market.
Aimed at calibration laboratories, small in-house calibration and repair workshops and meter manufacturers who require production and test calibration capabilities, the 5500E has the basic performance and functions needed for electronic test instrument calibration. These include the ability to calibrate digital multimeters and clamp meters to comply with ISO 9000 or other quality standards. It can also be used to calibrate bench multimeters (up to 4,5 digits), panel meters, electronic thermometers, chart recorders, oscilloscope recorders, XY recorders and data loggers.
The 5500E has a wide range of outputs available from a single calibration source. These include DC and AC voltages up to 1020 V, DC and AC currents up to 550 A (using the 5500A/COIL, 50 turn current coil accessory) and variable resistances up to 330 M. The calibrator also provides continuously variable capacitance values up to 1,1 mF. For temperature calibration applications, thermocouples and RTDs are simulated and thermocouple signals can be measured. It also generates digitally synthesised extended bandwidth sine, truncated sine, triangle and square waveforms.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Comtest introduces Ametek’s Mi-BEAM series Comtest
Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.
printer friendly version