The ChipCorder ISD15D00 is a low-cost voice playback device from Nuvoton Technology.
The IC features a 3 V regulator for external Flash memory and its integrated architecture enables 2,7 to 5,5 V operation; a 1 W speaker driver eliminates the need for an amplifier. In automotive applications, the device can provide audio-quality voice playback to vehicles' entertainment, traffic-information and warning systems. It adheres to the strict AEC-Q100 stress-test qualification.
The IC has digital decompression, comprehensive memory management and integrated analog/digital audio signal paths. It interfaces with serial Flash memory to provide a two-chip solution for non-volatile audio playback. Additionally, its message management feature is designed to simplify code development for playback-only applications. The IC can take digital audio data via its I²S digital audio interface or through an SPI. When I²S input is selected, it replaces the analog audio inputs and supports sample rates of 32, 44,1 or 48 kHz, depending on clock configuration.
There are also built-in analog audio inputs, analog audio line driver and speaker driver output. An aux-in analog audio input has a fixed gain configured by SPI command. Aux-in can directly feed through to the analog outputs, as well as mix with the DAC output and then feed through to the outputs. Programmable GPIO allows designers to trigger combinations of script macros with audio files and to enable user-initiated audio.
Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...Precision voltage reference Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...Microphones enable low-power always-on state Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...Low power, low-noise amplifier Altron Arrow
Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.
Read more...QLC Flash memory with the latest BiCS technology EBV Electrolink
Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.
Read more...Precision op-amp Altron Arrow
Analogue, Mixed Signal, LSI
The ADA4099-1 and ADA4099-2 are single/dual robust, precision, rail-to-rail input/output operational amplifiers with inputs that operate from -VS to +VS and beyond, which is referred to as Over-The-Top.
Read more...Using linear regulators as a filter Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Different circuits can be used to filter a supply voltage, and this article explains the main differences between using an LC filter and a linear regulator for filtering.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
printer friendly version