Computer/Embedded Technology


Two-port serial PCI card

29 September 2010 Computer/Embedded Technology

The PCI-1603 from Advantech is a universal card offering a range of high-speed interfacing options ranging from 50 bps to 230,4 Kbps and isolation against harsh environments. Users can individually configure each port between the popular RS232 and noise-resistant current-loop. The utilisation of 16PCI1952 UARTs with on-chip 128-Byte FIFO buffers offers fast and reliable data transmission. This makes the board suitable for high-speed serial I/O applications under multitasking environments.

The serial card fulfils various application needs for distant transmission and isolation. It has two ports, each individually configurable to a different transmission rate and mode. For current-loop transmission mode, the speed can be up to 57,6 Kbps. Following the universal PCI interface, the PCI-1603 plugs into a 3,3 V or 5 V PCI slot. It is designed with 3000 V d.c. isolation for both RS232 and current-loop and industrial-grade working temperature tolerances. The I/O address is automatically assigned by PCI plug-and-play, offering users full compatibility with Windows applications.

The PCI-1603 is suitable for shop floors, warehouses, pharmaceutical/food process control, water treatment processes, transportation management systems, facility management systems, environment monitoring systems and more.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...
An industry-first Android 16 smart module solution
RF Design Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Unleash the next generation of Intel Core power
Vepac Electronics Computer/Embedded Technology
The EPIC-BTS9 from AAEON, is tailor-made to bring unprecedented performance to smart manufacturing and industrial robotics.

Read more...
QMC series I/O modules for VITA 93 small form factor mezzanine
Rugged Interconnect Technologies Computer/Embedded Technology
The new line of VITA 93 QMC mezzanine modules, from Acromag, are engineered to meet increasing demands for smaller form factors and more performance.

Read more...
MIKROE celebrates 2000th Click board
Computer/Embedded Technology
MIKROE has launched its 2000th Click board, the RTC 27 Click, designed for low-power real-time clock and calendar functionality, time tracking, alarm event generation, watchdog timing, and timestamp capture.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved