Small case size added to range

Enclosures, Racks, Cabinets & Panel Products

1 September 2010 Enclosures, Racks, Cabinets & Panel Products

The UNITEC series of cases from OKW has now been extended by a smaller S size. The UNITEC range is characterised by two different operating panels at right angles to each other with ergonomic inclinations of 72° and 18°.

Depending on the application, these can be used for operating and/or reading purposes, thus allowing simultaneous applications.

The standard version of the UNITEC was designed as a three-part unit and consists of a top part, a bottom part and a rear-facing front part in the standard colour of off-white (RAL 9002). The M version has the dimensions 148 x 210 x 80/25 mm, while the new S size has the dimensions 125 x 177 x 69/22 mm. In order to satisfy individual customer requirements, the top and front parts are available with recesses of different depths:

* Variant 1: with an all-over operating area with a depth of 0,6 mm (eg, for using overlay foils).

* Variant 2: top and bottom parts each with separate defined areas (1,4 mm deep) for membrane keyboards etc.

* Variant 3: Top part with a recess of 0,6 mm, front part 1,4 mm.

* Variant 4: Top part with a recess of 1,4 mm, front part 0,6 mm.

It is up to the user to decide whether they wish to use no operating area at all, only one area (on the front or on the back) or even both areas with appropriate membrane keyboards.

This range of cases is highly flexible in its assembly capability, since the printed circuit boards can be positioned in any of the three individual parts, and thanks to its flat surfaces is ideal for the use of large displays or touch screens. Since the operating panels are positioned at right angles to each other, it is possible to install electronics and interfaces as complete ready-made packages. The bottom part of the case already has matching installation bays as standard for separate battery compartments (in the range of accessories) with 3x or 5x 1,5 V AA batteries, or completely closed for an incoming power supply. The portfolio is completed by a two-part bracket with the help of which the UNITEC case can be used in different ergonomic environments for wall-mounted applications.

Share this article:

Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.

Read more...

Popular aluminium enclosure series expanded
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.

Read more...

Modular sub racks, front panels and modules
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Vero’s industry-compliant KM6 range is a modular, pluggable, 19-inch rack-based enclosure to securely house and protect electronic equipment.

Read more...

High-speed data transmission connectors
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Fischer Connectors is expanding its platform capabilities to meet the most demanding connectivity requirements for high-speed data transfer using the USB 3.2 Gen 2 protocol up to 10 Gbit/s.

Read more...

Efficient and flexible cable marking system
RS South Africa Enclosures, Racks, Cabinets & Panel Products
Legrand’s cable marking systems have been designed not only for flexibility and reliability, but for easy installation and optimum safety in any application.

Read more...

Samtec launches new Nitrowave cable
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Samtec’s Nitrowave is a new, high-performance cable technology that is phase and amplitude stable, and has improved stability with flexure over time.

Read more...

316 stainless steel enclosures
Enclosures, Racks, Cabinets & Panel Products
316 adds molybdenum to the alloy increasing its corrosion resistance compared to other grades of stainless steel, making it perfectly suitable for use in corrosive environments such as chemical plants, refineries, and in marine applications.

Read more...

Swing-out industrial wall-mount rack cabinet
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.

Read more...

Categories

Enclosures, Racks, Cabinets & Panel Products

Small case size added to range

Further reading:

Publications by Technews