18-slot PXI/CompactPCI chassis for high slot-count measurement and automation applications
23 May 2001
Test & Measurement
Engineers can now integrate up to 18 PXI/CompactPCI modules into a compact, rack-mountable, tightly synchronised measurement and automation system with National Instruments' PXI-1006 3U chassis. The PXI-1006 incorporates an 18-slot PXI backplane, a removable 600 W power supply and three 130 CFM fans. The chassis has an advanced cooling design, extended star trigger bus and an autosensing 10 MHz clock to ensure synchronisation among all peripheral slots.
With two PXI-to-PXI bridges, the PXI-1006 backplane transparently extends both the PXI bus and the timing and triggering signals to all 18-slots while maintaining the full 132 Mbps bgandwidth defined by the PXI specification. NI designed the PXI-1006 with airflow deflectors and venting to ensure that each of the 18 slots in the chassis receives more uniform airflow. This reduces the operating temperature and prolongs system life.
The +3,3, +5 and +12 V d.c. signals are also present on the connector so engineers can monitor power in the chassis or can power an external device.
National Instruments
082 877 8530
Further reading:
60 MHz 16-bit AWG
Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...
AC programmable power
Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...
QA introduces large chisel tip style probes
Techmet
Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.
Read more...
Digital PSU with four variable outputs
Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...
High-voltage insulation resistance testers
Comtest
Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.
Read more...
Digital accelerometer for high dynamics applications
RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...
Acceleration sensors for wearables
Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only
1,2 x 0,8 x 0,55 mm.
Read more...
Accurate laser measurement
Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...
Handheld analyser with wide frequency range
Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...
Real-time portable spectrum analyser
Vepac Electronics
Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.
Read more...