Signal conditioning component modules

23 May 2001 Test & Measurement

National Instruments is offering new signal conditioning component (SCC) modules for frequency-to-voltage conversion, integrated circuit piezoelectric (ICP) accelerometers and resistance temperature detectors (RTDs).

* The SCC-FV01 is a dual-channel linear frequency-to-voltage conversion module that accepts ±10 V signals up to 100 Hz.

* The SCC-ICP01 single-channel module for active accelerometers accepts ñ5 V signals and has a 19 kHz three-pole Bessel low-pass filter for noise and anti-alias filtering.

* The dual-channel SCC-RTD01 module accepts two, three and four-wire platinum RTDs and has a 1 mA excitation source to power RTDs. Both channels feature a gain of 25 and a 30 H low-pass filter to remove noise.

* The SCC-LP series modules are two-channel fourth order Butterworth low-pass filter modules with differential inputs that support ±10 V signals. The SCC-LP04 includes noise and anti-alias filtering for general inputs and provides a 1 kHz cut-off frequency.

National Instruments

082 877 8530

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...

---

AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...

---

QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...

---

Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...

---

High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...

---

Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...

---

Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...

---

Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...

---

Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...

---

Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...

---