The ACS709 current sensor IC from Allegro Microsystems is designed to provide economical and precise means for current sensing applications in industrial, automotive, commercial and communications systems. The device is offered in a small footprint surface mount package that allows easy implementation in customer applications.
The device consists of a precision linear Hall sensor integrated circuit with a copper conduction path located near the surface of the silicon die. Applied current flows through the copper conduction path, and the analog output voltage from the Hall sensor IC linearly tracks the magnetic field generated by the applied current. The accuracy of the ACS709 is maximised with this patented packaging configuration because the Hall element is situated in extremely close proximity to the current to be measured.
High level immunity to current conductor dV/dt and stray electric fields, guarantees low output ripple and low offset drift in high-side applications. The voltage on the over-current input allows customers to define an over-current fault threshold for the device. When the current flowing through the copper conduction path exceeds this threshold, the open drain over-current fault pin will transition to a logic low state. Factory programming of the linear Hall sensor IC inside of the ACS709 results in high accuracy in both analog and digital output signals.
The internal resistance of the copper path used for current sensing is typically 1,1 m, for low power loss. Also, the current conduction path is electrically isolated from the low-voltage device inputs and outputs. This allows the IC to be used in applications requiring electrical isolation, without the use of opto-isolators or other costly isolation techniques.
hybridNETBOX instrumentation platform Vepac Electronics
Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.
Read more...Reference board for cardio monitoring Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.
Read more...ST MCUs extend ultra-low power innovation Altron Arrow
DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.
Read more...14-bit AWG at 20 GS/s Vepac Electronics
Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.
Read more...Multicell battery monitoring Altron Arrow
Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.
Read more...Additions to APD5000 series oscilloscopes Osiris Technical Systems
Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.
Read more...Innovative satellite navigation receiver Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.
Read more...LED driver for industrial power supply indication Altron Arrow
Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.
Read more...High-voltage step-down DC-DC converter Altron Arrow
Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.
Read more...Handheld RTSA up to 9,5 GHz Vepac Electronics
Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.
printer friendly version