Test & Measurement


Combined frequency counters/function generators

20 January 2010 Test & Measurement

The Iso-Tech GFG-8219A and GFG-8255 have a combined 150 MHz frequency counter and function generator with AM/FM modulation. The function generator uses direct digital synthesis technology to provide accurate and stable frequency performance with high waveform fidelity with conventional analog control of waveform output amplitude and DC offset. The frequency and duty cycle settings can be entered directly via the keypad and spin-wheel and stored in the internal memory.

The GFG-8219A function generator operates from 0,3 Hz to 3 MHz, while the GFG-8255 covers the range from 0,5 Hz to 5 MHz. Both units provide a 6-digit LED readout of generator frequency, and can generate sine, square, triangle and ramp waveforms.

For more information contact RS Components, +27 (0)11 691 9300, [email protected], www.comtest.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...
QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...
Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...
High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...
Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...
Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...
Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...
Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...
Comtest introduces Ametek’s Mi-BEAM series
Comtest Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.

Read more...