Power Electronics / Power Management


AC-DC modules with reduced standby power

11 November 2009 Power Electronics / Power Management

MTM Power has developed a series of primary switchers with low 300 mW power consumption in standby mode. The AC-DC power modules series PMAS10 is designed as universal compact power supplies with wide AC and DC input ranges and single-output options of 5, 12, 15 and 24 V. The small dimensions of 52,0 x 36,5 x 24,0 mm and the high power density allow an efficient 10 W solution for different tasks where low power is needed.

The power supplies are prepared for applications in Class 1 and/or 2 and exhibit efficiency of greater than 80%. The vacuum encapsulated modules are characterised by a mechanically and electrically rugged construction and are designed for PCB mounting. They are subjected to an automatic 100% final test and 100% burn-in test. The modules comply with the Low Voltage Directive as well as the up-to-date standards as regards CE conformity and are CB-Scheme, VDE and UL/cUL approved.

For more information contact Edwin Brown, Vepac Electronics, +27 (0)11 453 1910, [email protected], www.vepac.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Smart and secure way to power IT
RS South Africa Power Electronics / Power Management
Delivering more output, security, and control than other devices in its class, Eaton’s new 5P Gen 2 UPS also enables fleet management, remote UPS setting, and remote firmware upgrades.

Read more...
Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...
Wine farm turns to solar installation for power
Current Automation Power Electronics / Power Management
Slanghoek Wine farm opted into a power purchase agreement to lower overall electricity costs and enter a true sustainable future, with a price-competitive edge on lower running costs.

Read more...
60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
Industrial PSU family
Brabek Power Electronics / Power Management
The RACPRO1 family of PSUs supports a universal DC input voltage range from 430 to 850 V DC, allowing the parts to support renewable energy and microgrid applications.

Read more...
Integrated POL voltage regulators
EBV Electrolink Power Electronics / Power Management
Infineon’s TDA38807 and TDA38806 are their highest density high-efficiency integrated point-of-load (IPOL) solutions for smart enterprise systems.

Read more...
Hi-Rel quarter-brick converters
Accutronics Power Electronics / Power Management
Gaia Converter’s quarter-brick series DC-DC power modules provides output power levels ranging from 75 to 250 W in fixed output voltages.

Read more...
1700 V GaN Switcher IC
Future Electronics Power Electronics / Power Management
Power Integrations has introduced a new member of its InnoMux-2 family of single-stage regulated multi-output offline power supply ICs, the industry’s first 1700 V gallium nitride switch.

Read more...
SBC with Intel N-series processor
Vepac Electronics Editor's Choice
The UP 710S represents the evolution of the credit card-sized form factor, adding new, sought-after features and performance.

Read more...
How ADI battery management solutions empower safer, smarter robots
Altron Arrow Editor's Choice Power Electronics / Power Management
Choosing an appropriate battery pack and its accompanying battery management system is a critical decision in designing an autonomous mobile robot.

Read more...