Tyco Electronics has introduced new wire-to-board plug connectors and board-to-board connectors to its family of hermaphroditic blade and receptacle connectors. The connectors are designed to make connecting of aluminium-clad printed circuit boards, commonly used for LED lighting applications that include lighting controls and LED light modules, faster and easier.
The new plug connectors use tin-plated brass crimp-snap contacts for 0,3 to 0,9 mm² stranded wire and a 94 V-0-rated thermoplastic housing. The plug connector mates with board-mount connectors and features positive latching for a secure connection.
The low-profile surface-mount board connector uses an hermaphroditic blade and receptacle design to allow LED printed circuit board strips to join with more flexibility than traditional post-and-receptacle headers. Connections can be made by sliding the two boards together horizontally or vertically. The capability to slide the two boards together vertically makes replacement of a board in mid-strip easier by lifting up the strip to be replaced and lowering in the new one.
The same board-mount connector is used for both board-to-board and wire-to-board connectivity. The hermaphroditic design results in only one board-mount part needing to be inventoried and simplifies design by using the same footprint on both ends of the strip. Contacts are supplied in reeled form for processing by high-speed terminating equipment.
Connectors are available in two, four or six positions. They are rated to 6 A and 125 V a.c./d.c., with an operating temperature range from -40°C to +105°C.
High-efficiency buck-boost converter Altron Arrow
Power Electronics / Power Management
The MAX77859 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range.
Read more...Low-cost i.MX development board Altron Arrow
DSP, Micros & Memory
The FRDM i.MX 93 development board from NXP is a low-cost and compact development board featuring the i.MX93 applications processor.
Read more...Ultrawideband Low Noise Amplifier Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The ADL8101 is an ultrawideband, low noise amplifier that operates from 10 kHz to 22 GHz with typical gain and noise figure of 14 dB and 3,5 dB respectively.
Read more...Connectors for the latest server applications Spectrum Concepts
Interconnection
To deliver high-speed performance, many next-generation server applications will use cables inside the box instead of PCB traces to maintain the signal integrity demanded by high-speed communications.
Read more...Ryzen-based computer on module Altron Arrow
AI & ML
SolidRun announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.
Read more...Robust and customisable SBC Altron Arrow
DSP, Micros & Memory
Pairing the powerful i.MX8M Plus System on Module (SoM) from SolidRun, which features the i.MX 8M Plus SoC from NXP, this high-performance SBC is set to transform industrial environments.
Read more...New family supports future cryptography Altron Arrow
DSP, Micros & Memory
NXP has introduced its new i.MX 94 family, which contains an i.MX MPU with an integrated time-sensitive networking (TSN) switch, enabling configurable, secure communications with rich protocol support in industrial and automotive environments.
Read more...NXP’s all-purpose microcontroller series Altron Arrow
DSP, Micros & Memory
NXP has released its MCX A14x and A15x series of all-purpose microcontrollers which are part of the larger MCX portfolio that shares a common Arm Cortex-M33 core platform.
Read more...Non-terrestrial network module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.
Read more...Cellular IoT connectivity via satellite Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.
printer friendly version