Adding to its range of timer modules, Panasonic has introduced new analog and digital timer families.
The analog PM4H variants feature various operating modes including pulse ON-delay, pulse flicker, pulse ON-flicker, differential ON/OFF-delay, signal OFF-delay, pulse one-shot and pulse one-cycle modes. They have a time range stretching from 0,1 seconds to 500 hours, which is controllable by an easy-to-read analog setting. Operating voltages are 12 V d.c., 24 V a.c./d.c. and 100–240 V a.c., with a 250 V a.c. relay output capable of driving a 5 A load. They are protected to either IP50 or IP65 in front and feature exchangeable black and white panel covers. The timers are available with pin or screw terminal connections and measure 48 x 48 mm on the front panel, with installation depths of 62,5 or 66,5 mm, depending on the model.
The digital LT4H timers feature power ON-delay, signal ON-delay, signal OFF-delay, pulse one-shot, pulse ON-delay, signal flicker and totalising ON-delay operating modes, selectable via a DIP switch. They have a two-colour backlit LED display and a time range from 0,001 seconds to 999,9 hours. Operating voltages and relay output are identical to the analog versions, with an additional transistor output switching 100 mA at 30 V d.c. They are protected to IP66 in front and feature exchangeable black and white panel covers. The timers are available with pin or screw terminal connections and measure 48 x 48 mm on the front panel, with installation depths of 65,5 or 70 mm, depending on the model.
hybridNETBOX instrumentation platform Vepac Electronics
Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.
Read more...14-bit AWG at 20 GS/s Vepac Electronics
Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.
Read more...Handheld RTSA up to 9,5 GHz Vepac Electronics
Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.
Read more...Programmable switching DC PSU series Vepac Electronics
Power Electronics / Power Management
The SPS6000X Series from Siglent is a programmable switching DC power supply with a wide range of single output and constant power features.
Read more...PCB-mount 40 W converter Vepac Electronics
Power Electronics / Power Management
With an ultra-compact 2,5 x 2,5 mm package and a high-power density of 93 W/in3, these converters are optimised for efficiency and space-saving designs.
Read more...Computing in industrial environments Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...Advanced portable spectrum analyser Vepac Electronics
Test & Measurement
HAROGIC has introduced the SAE-200, a USB-based real-time spectrum analyser that operates from 9 to 20 GHz with a 100 MHz bandwidth.
Read more...DDR5 DRAM series Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
Read more...2-port soldering station Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
Hakko’s soldering station has improved sensor sensitivity and a design that smoothly transfers the heat from the heater to the tip.
Read more...Complete soldering station in an iron Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
Hakko’s new FX-600D is a complete soldering station packed into a small and easy-to-handle soldering iron.