Fluke has introduced two new colour ScopeMeters with industrial bus health test capability. The 225C and 215C offer all the functionality of the 199C and 196C colour ScopeMeters but with additional capabilities for a wide variety of industrial bus systems.
The meters’ bus health test mode enables technicians to automatically analyse electrical signals passing through the bus. Technicians can compare the parameters to standard values as described in the industry standards for that bus type. The 'Eye pattern' display enables technicians to visually check the overall signal quality. Parameters are automatically qualified as 'good', 'weak' or 'bad' based on a comparison to the appropriate industrial standards or user-defined reference values. Each measured parameter is presented with an instantaneous value and with statistical minimum and maximum values measured over time. The reference values are displayed, to give the user an easier grip on the system’s behaviour.
Tested parameters include signal amplitudes, bias voltage, rise and fall times, jitter, distortion and noise levels (in-band noise and out-of-band noise) depending on the requirements of the associated industry standard.
hybridNETBOX instrumentation platform Vepac Electronics
Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.
Read more...14-bit AWG at 20 GS/s Vepac Electronics
Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.
Read more...Additions to APD5000 series oscilloscopes Osiris Technical Systems
Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.
Read more...Handheld RTSA up to 9,5 GHz Vepac Electronics
Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.
Read more...Comtest Group celebrates 20 years! Comtest
News
The Comtest Group is proudly celebrating 20 years of successful trading in the southern African test and measurement, communications, equipment, solutions, and specialised systems markets.
Read more...InterCal introduces a new range of calibrators Intercal
Test & Measurement
Calibration is a critical process in numerous industries, from manufacturing to healthcare, ensuring that instruments and devices provide accurate and reliable measurements.
Read more...Power Energy Meter for solar projects Mimic Components
Test & Measurement
The Mi550 Power Energy Meter is a handheld three-phase power quality analyser that connects externally with Rogowski coils or voltage-type CTs, allowing for testing without disconnection.
Read more...MT8870A for NTN NB-IoT testing Tamashi Technology Investments
Test & Measurement
Samsung Electronics has selected the Anritsu Universal Wireless Test Set MT8870A for use on the mass-production lines of the Galaxy S25.
Read more...XJLink-PF40 JTAG controller ASIC Design Services
Test & Measurement
XJTAG, a specialist in electronic testing, has released its new XJLink-PF40 JTAG controller together with version 4 of its popular PCB software testing suite.
printer friendly version