Man-machine interface cases

18 March 2009 Enclosures, Racks, Cabinets & Panel Products

The new Interface Terminal from OKW is designed to meet growing demands in the field of data visualisation for man-machine interfaces.

It is tailored to the more and more widespread adoption of touch-screen technology and enables enhanced mobility and independence by allowing the user to decide whether to use the device as a mobile or stationary unit.

The Interface Terminal is a complex system with which several case versions can be realised. The foundation of the system is the basic housing, consisting of the top and bottom case parts. For mobile, cable-linked use, the lower part is available not only as a closed version but also with a battery compartment for five 1,5 V AA batteries.

For ease of operation, the styling of the handle area is flat and the top part of the housing can be substituted with an aluminium front plate. The case can be mounted on the base either invisibly by means of self-tapping screws or by a simple snap-in mechanism for data transmission or for a power supply for charging. Unauthorised removal can be prevented at any time by means of two spagnolet locks. When the base is used, the operating panel is ergonomically inclined by 20° – in portrait or landscape orientation, depending on requirements.

The cases are available in off-white and in the following dimensions: the desktop/wall-mounted version measures 165 x 225 x 104 mm (L x W x H); the mobile version with/without battery compartment is 165 x 225 x 38 mm; and the ‘mobile with loading station’ version has dimensions of 165 x 225 x 114 mm. The recessed operating area on the front surface is ideally suited for integrating membrane keyboards, graphic overlays, displays or touch screens.

Further reading:

High visibility 4-digit panel ammeters
Electrocomp Express Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.

Read more...

---

Multi-channel SMPS cable assemblies
RFiber Solutions Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.

Read more...

---

Building the control panels of the future
Omron Electronics Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.

Read more...

---

What’s the big deal with DPL?
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.

Read more...

---

Flexible and high-density heat rejection system
Enclosures, Racks, Cabinets & Panel Products
The introduction of the Vertiv CoolLoop Trim Cooler supports air and liquid cooling applications for high-performance computing.

Read more...

---

AI domain-specific architecture
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Designing a new product is often an exercise in priorities, carefully balancing a range of capabilities to obtain the best overall result.

Read more...

---

DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...

---

Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.

Read more...

---

Popular aluminium enclosure series expanded
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.

Read more...

---

Modular sub racks, front panels and modules
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Vero’s industry-compliant KM6 range is a modular, pluggable, 19-inch rack-based enclosure to securely house and protect electronic equipment.

Read more...

---