Single board computer platform
28 March 2001
Computer/Embedded Technology
Ampro's EnCore platform is made up of a complete single-board computer (SBC) in a small module that interfaces with a host baseboard via the PCI bus and a set of I/O signals supporting direct peripheral and network connection. Along with a 266 MHz mobile Pentium processor, the EnCore 500 includes 3D video and LCD interfaces, 10/100Base-T Ethernet and SoundBlaster-compatible sound interface. It supports up to 128 MB SODIMM SDRAM, two serial ports, ECP/EPP parallel port, (4) USB ports, primary IDE controller with a SanDisk CompactFlash/IBM MicroDrive support option, and PC/104-Plus expansion (PCI only).
Until now, designers could either design a CPU subsystem into their product or choose an off-the-shelf computer board that either requires a bulky card cage and backplane (such as VME or CPCI) or some other fixed form-factor bus expansion (such as EBX or PC/104) for their application-specific logic. Many designers have chosen to design their own CPU subsystem, in spite of the extended design time associated with porting software to their unique system architecture.
EnCore enables designers to incorporate a proven CPU subsystem and common peripherals with out-of-the-box software support without packaging or form-factor constraints imposed on their application-specific logic board. Working like a high-integration chip, the platform interfaces directly to a designer's form-factor independent system board containing application- specific logic and I/O connections. Designers can now focus their design resources on their application-specific system board and application software. All that is needed for the computing subsystem is a powerful EnCore module with the CPU of their choice. The platform has the ability to write application software to a particular RTOS API in C, C++ or Java and then move the application to different processors supported by that RTOS.
EnCore Modules interface to a baseboard through a 120-pin PCI bus connector that is identical to the connector used for the PCI bus on PC/104 Plus boards.
For further information contact Electronic Products Design, (012) 665 9700.
Further reading:
Generate waveforms at 10 GS/s
Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...
Quad-port 10GBASE-T controller
Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...
HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...
IoT gateways
Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...
1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...
Keeping it cool within the edge data centre
Computer/Embedded Technology
The creation of more data brings with it the corresponding need for more compute power and more data centres, which, in turn, can create unique challenges with regards to securing the environment and cooling the IT loads.
Read more...
NEX XON becomes Fortinet partner
NEC XON
Computer/Embedded Technology
This designation demonstrates NEC XON’s ability to expertly deploy, operate, and maintain its own end-to-end security solutions, helping organisations to achieve digital acceleration.
Read more...
Online tool for data centre planning and design
Computer/Embedded Technology
Vertiv has unveiled a new tool, Vertiv Modular Designer Lite, designed to transform and simplify the configuration of prefabricated modular (PFM) data centres.
Read more...
Mission computer for HADES
Rugged Interconnect Technologies
Computer/Embedded Technology
North Atlantic Industries’ latest product, the SIU34S, has been selected as the mission computer for the High Accuracy Detection and Exploitation System (HADES) program.
Read more...
14th Gen power to boost AI at the edge
Rugged Interconnect Technologies
Computer/Embedded Technology
ADLINK’s inclusion of Intel’s 14th generation Core processors into its latest embedded boards and fanless computers is set to boost the AI and graphics capabilities.
Read more...
printer friendly version