Computer/Embedded Technology


Industrial controller certified to IP68

9 July 2008 Computer/Embedded Technology

Tibbo’s DS1000 BASIC-programmable industrial controller recently received IP68 certification through the use of a secondary waterproof cover which attaches to the top of the unit and accommodates up to six signal cables that can securely exit through it.

The DS1000 is based on Tibbo’s EM1000 module, featuring an 88 MHz purpose-built CPU with 512 or 1024 KB of onboard Flash and a realtime clock with backup power. By way of communications, it features one 100BaseT Ethernet port, as well as four high-speed RS232 ports supporting data rates up to 920 Kbps and automatic flow control.

The controller is programmable using Tibbo BASIC, which provides a familiar programming interface for users of BASIC-based languages, as well as numerous high-level objects to speed and simplify coding. A Web server with dynamic content generation is also integrated.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New GNSS passive patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.

Read more...
6 – 18 GHz driver amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.

Read more...
Computing in industrial environments
Vepac Electronics Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.

Read more...
DDR5 DRAM series
Vepac Electronics Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.

Read more...
3,75 GHz RF inductor
RF Design Passive Components
The ceramic chip wire wound inductor from Coilcraft features a DC resistance of 1 O, a DC current of 175 mA, and a self-resonant frequency of 3,75 GHz.

Read more...
Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...
Quad-port 10GBASE-T controller
Rugged Interconnect Technologies Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.

Read more...
IoT in a Box
RF Design Telecoms, Datacoms, Wireless, IoT
RAKwireless and Datacake have collaborated on a solution called ‘Real IoT in a Box’ to address the complexities of deploying IoT solutions, particularly when it comes to LoRaWAN.

Read more...
Direction-finding antenna board
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox’s ANT-B11 Bluetooth 5.1 direction-finding antenna board is a compact Bluetooth Low-Energy angle-of-arrival antenna and sensor board combined.

Read more...
DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...