The new Fluke 8808A bench multimeter features 5,5 digit resolution, multimeasurement capability, and a dual display that enables users to measure two different but related parameters simultaneously, simplifying test and troubleshooting.
The multimeter has six dedicated setup buttons on the front panel that function as 'pre-sets' similar to those on a car radio, making it fast and easy for production operators to quickly follow a test procedure without having to push multiple buttons. A Hi/Lo Limit Compare mode with pass/fail indicators can help take the guesswork out of testing and eliminate production mistakes. Setup buttons with pass/fail test mode provide measurement consistency that can improve quality and efficiency in manufacturing test applications.
With measurement functions including Volts, Ohms, Amps and frequency, the Fluke 8808A also provides the performance and flexibility required from a bench meter in research, development and service applications. It has basic Volts DC accuracy of 0,01%, and features dedicated DC low current leakage measurement capability. It uses a high impedance input measurement circuit to take sensitive low current measurements of less than 2000 μA with a resolution of up to 100 nA, without loading the circuit under test. The 2 x 4 Ω function uses patented split terminal jacks that allow users to perform 4-wire measurements using only two leads instead of four. The optional 2 x 4 wire test leads make precise 4-wire low Ohms measurements possible on miniature surface-mount components.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Comtest introduces Ametek’s Mi-BEAM series Comtest
Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.
printer friendly version