DSP, Micros & Memory


Half- and full-duplex RS485 transceivers

31 October 2007 DSP, Micros & Memory

Maxim's MAX13181E/2E/3E/4E are full-duplex and selectable half-/full-duplex RS485 transceivers. Packaged in a 2 mm x 2 mm microDFN, these transceivers are suitable for space-constrained applications such as motor control and portable sensors. The devices include enhanced ±15 kV ESD protection (Human Body Model), pullup/pulldown resistors, and a 1/8 unit-load receiver-input impedance, thus allowing up to 256 transceivers on the bus. Additionally, the MAX13181E/2E provide slew-rate-limited drivers that reduce EMI and enable error-free transmission up to 500 Kbps in environments with high levels of radiated noise. The MAX13183E/4E, on the other hand, feature full-speed drivers that allow data rates up to 16 Mbps. The ICs operate over the -40°C to +85°C temperature range, and are available in a 10-pin microDFN package.

For more information contact CST Electronics, +27 (0)11 608 0070, [email protected], www.cstelectronics.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Redefining entry-level MCUs
NuVision Electronics DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.

Read more...
Robust PoE module
CST Electronics Power Electronics / Power Management
The Ag59800-LPB high power, IEEE 802.3bt compliant, PD module from Silvertel offers typical efficiency of 95% making it an ideal choice for higher power, space-constrained applications.

Read more...
Microchip enhances TrustMANAGER platform
Altron Arrow DSP, Micros & Memory
Firmware over-the-air updates and remote cryptographic key management provide scalable solutions for addressing IoT security challenges.

Read more...
MCU for low-power, IoT applications
NuVision Electronics DSP, Micros & Memory
Silicon Labs recently announced the PG26, a general-purpose microcontroller with a dedicated matrix vector processor to enhance AI/ML hardware accelerator speeds.

Read more...
EEPROMs for industrial and military markets
Vepac Electronics DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.

Read more...
PLCnext – Open, IIoT-ready industrial platform
IOT Electronics DSP, Micros & Memory
PLCnext can be used alongside an existing PLC system, collecting control system data via EtherNet/IP, PROFINET, or MODBUS, and can push this information to a cloud instance.

Read more...
ICs vs modules: Understanding the technical trade-offs for IoT applications
NuVision Electronics Editor's Choice DSP, Micros & Memory
As the IoT continues to transform industries, design decisions around wireless connectivity components become increasingly complex with engineers often facing the dilemma of choosing between ICs and wireless modules for their IoT applications.

Read more...
Hardware quantum resistance to embedded controllers
Avnet Silica DSP, Micros & Memory
To help system architects meet evolving security demands, Microchip Technology has developed its MEC175xB embedded controllers with embedded immutable post-quantum cryptography support.

Read more...
High-performance processor for edge-AI
Altron Arrow DSP, Micros & Memory
The STM32MP23 microprocessor from STMicroelectronics is the latest addition to the STM32MP2 series, designed to meet the demands of industrial, IoT, and edge AI applications.

Read more...
PolarFire SoC FPGAs achieve AEC-Q100 qualification
ASIC Design Services DSP, Micros & Memory
Microchip Technology’s PolarFire SoC FPGAs have earned the Automotive Electronics Council AEC-Q100 qualification.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved