The 771 is Fluke's latest innovative approach to measuring milliamp loop signals, where lifting a wire from a terminal (breaking the loop) is now no longer necessary. This directly impacts maintenance time by removing the need to call a control room to override the control of a process loop when breaking the loop. It can save time when testing analog I/O on a PLC for example, because it eliminates the need to check measurements on a console. In addition, the meter eliminates the possibility of catastrophic plant outage caused by the accidental opening of a critical loop.
The meter features accuracy of 0,2%, with resolution and sensitivity to 0,01 mA. The hold function captures and displays changing measurements and the dual backlit display shows both the mA measurement and the percentage of 4-20 mA span. The detachable clamp can be used docked or attached via its extension cable to facilitate measurement in tight spaces, and a measurement spotlight is integrated to illuminate wires in dark enclosures. This meter can also measure 10-50 mA signals in older control systems using its 99,9 mA range.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Comtest introduces Ametek’s Mi-BEAM series Comtest
Power Electronics / Power Management
The Mi-BEAM series is a programmable DC power system that can be used in testing batteries, fuel cells, and solar inverters.
printer friendly version