The NJU7084 is a CMOS audio power amplifier from New Japan Radio designed for telephone applications. No external coupling capacitors are required because it has differential outputs. The closed loop gain is adjusted by two external resistors, and an SD pin permits power down while muting the input signal. The NJU7084 is suitable for telephones (incl. portable and wireless), white goods and other speaker amplifier applications. It operates from 2,8 to 5,5 V, and draws 2,0 mA typ. at 3 V. In power down mode it draws only 2 μA typ. Output power is 1 W at 5 V (RL = 8 Ω); 0,4 W at 3 V (RL = 4 Ω). Load impedance can be 4 to 200 Ω. The NJU7084 has a thermal shutdown circuit and comes in VSP8 and DMP24 packages.
A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...HiRel components from Kyocera AVX Electrocomp
Passive Components
Kyocera AVX Corporation is a leading supplier of advanced components and interconnect solutions, offering a broad selection of passive components and connectors.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...SMD choke for currents up to 48 A Electrocomp
Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.
printer friendly version