Test & Measurement


IP-based test, measurement, control and automation

28 June 2006 Test & Measurement

Eagle Technology has introduced a new range of Ethernet IP-based MicroDAQ products. Complemented by its new EDRE Network Server extension package, the company says that its range of IP products usher in a new era of flexibility and connectivity for data acquisition, automation and control applications.

Currently, Eagle Technology's IP product range includes digital I/O models, with high speed analog streaming units becoming available in the near future.

MicroDAQ

The Ethernet MicroDAQ range of products allows remote process monitoring, automation and control, with multiple computers able to monitor and interact with a single Ethernet MicroDAQ simultaneously over existing IP networks. These units are fully compatible, hardware and software, with the USB and serial MicroDAQs. Also no knowledge of network programming is necessary to make use of this technology. Previously-developed software can seamlessly run on these devices by upgrading the existing EDRE API. The EDR Enhanced Software Tools also includes WaveView for Windows which is a feature rich software package to enable one to immediately begin using the Ethernet MicroDAQ. Easily configurable with an IP address, the company says that its IP-based products can be configured in seconds.

IP network functionality

The new EDRE Network Server function is available free of charge for all EDRE-supported Eagle data acquisition products. This new application module allows users to connect to, read from and write to any EDRE supported product connected to any computer on the network. For example, says Eagle, a PCI-730 card, Serial MicroDAQ, USB MicroDAQ or PC104-30F can all be accessed and used over an IP network as if though they were installed in one's own computer.

With these flexible product features, it is possible to have a large amount of distributed I/O in the plant, on a production line or even at several different production facilities, and yet be able to control and record the entire process in one central location. It can allow floor managers to monitor processes efficiency with a handheld PDA or similar device connected to a wireless network, giving access to critical information no matter where.

For more information contact Gregg Dolby, Eagle Technology, +27 (0)21 423 4943, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Additions to APD5000 series oscilloscopes
Osiris Technical Systems Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...
InterCal introduces a new range of calibrators
Intercal Test & Measurement
Calibration is a critical process in numerous industries, from manufacturing to healthcare, ensuring that instruments and devices provide accurate and reliable measurements.

Read more...
Power Energy Meter for solar projects
Mimic Components Test & Measurement
The Mi550 Power Energy Meter is a handheld three-phase power quality analyser that connects externally with Rogowski coils or voltage-type CTs, allowing for testing without disconnection.

Read more...
MT8870A for NTN NB-IoT testing
Tamashi Technology Investments Test & Measurement
Samsung Electronics has selected the Anritsu Universal Wireless Test Set MT8870A for use on the mass-production lines of the Galaxy S25.

Read more...
XJLink-PF40 JTAG controller
ASIC Design Services Test & Measurement
XJTAG, a specialist in electronic testing, has released its new XJLink-PF40 JTAG controller together with version 4 of its popular PCB software testing suite.

Read more...
INTEGRA Biosciences’ reagent dispenser now supports SiLA-2 integration
Test & Measurement
This new functionality will make it even easier to integrate the WELLJET into automated laboratory workflows, helping labs to enhance their productivity and reproducibility.

Read more...
Advanced portable spectrum analyser
Vepac Electronics Test & Measurement
HAROGIC has introduced the SAE-200, a USB-based real-time spectrum analyser that operates from 9 to 20 GHz with a 100 MHz bandwidth.

Read more...