LEM has added two members to its IT family of current transducers to address high-current applications. The IT 400-S and the IT 700-S are specified respectively for 400 and 700 A r.m.s. nominal. As with other members of the family, they offer very high accuracy, based on resolution better than 0,05 ppm, linearity better than 3 ppm and an initial offset between 30 and 50 ppm. Thermal offset drift is extremely low, at 0,5 ppm/K.
Featuring galvanic isolation, the IT 400-S and IT 700-S can be used for current measurement of any kind of waveform (including DC, AC, mixed and complex). They have been designed to operate from a bipolar ±15 V d.c. power supply and will accommodate round primary conductors of 26 and 30 mm diameter respectively.
In addition to their normal current output, the transducers offer an additional output indicating the transducer state (opened or closed contacts), and an external LED showing the normal operation.
With an operating temperature range of +10 to +50°C, the transducers will find applications in high-precision power supplies and high-performance gradient amplifiers for magnetic resonance imaging and other medical equipment, and also calibration test benches in laboratories and test departments. They can also be used as interfaces for power analysers when high accuracy is required.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Real-time portable spectrum analyser Vepac Electronics
Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.
printer friendly version