Secure transmission of information on data highways requires special security measures, because today more and more high performance data transmission at high speeds is required. Designed for these requirements are Erni's new shielded connectors to DIN 41612/IEC 603-2 and ANSI/VITA Standard for VME 64. ANSI/VITA 1-1994 Version approved 10 April, 1995. This version has 32 shielded contacts and 96 signal contacts plus the main advantages of a very low return loss, low crosstalk and very low insertion loss.
The shield type C on a Eurocard with a pitch of N x 2,54 mm uses the standard PCB hole pattern. Erni shielded connectors are mateable with standard (DIN 41612/IEC 603-2) type C connectors.
Main features are: excellent ground path via the continuous shield on each face of the board connector; low insertion and retention forces - special shielded contact design; ESD protection - early make/last break of 1,0 mm for the shielding contacts; no mismating - the shielding frame prealigns the connectors before mating; nondetachable shielding frame for the male connector; economical assembly of the female connector - solderless termination Erni PRESS-FIT contacts; male connector is fitted with solder pin contacts; the termination cross sections allow PCB hole diameter to IEC specification.
Connectors for the Smart Factory Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...Reliable photovoltaic adapter set Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
Read more...Multi-config connector series Future Electronics
Interconnection
Hirose Electric’s DF11 Series is a versatile 2,0 mm pitch, double-row board-to-wire connector designed to simplify a wide range of connection needs.
Read more...Ultra-rugged connector Hiconnex
Interconnection
Radiall has introduced a new connector for ribbon fibre connections called Fortero to provide proven performance in high-vibration, high-impact, and extreme environments.
Read more...Innovative D-Sub PushPull hood Hiconnex
Interconnection
HARTING has launched its new D-Sub PushPull housings, designed to improve efficient and process-safe handling by transforming a well-known connector family into a simplified solution.
Read more...High-density multicoax assemblies RFiber Solutions
Interconnection
Withwave’s high speed and high-density multicoax cable assemblies provides a wide range of multiple coax connectors and flexible cable assemblies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version