Multifunctional calibrator

4 May 2005 Test & Measurement

The Model CA71 from Yokogawa is a small, lightweight, multifunctional calibrator that can simultaneously source and measure voltage, current, resistance, TC, RTD, frequency and pulse signals.

Regular tests can be performed on TCs, RTDs and various other types of sensors and instruments. The CA71 can source signals for input to equipment and check output signal from equipment. In cases where numerous signal converters and other devices are mounted on a rack or panel, the calibrator can check the input and output signals of each device while simultaneously checking the power supply.

Values are set in steps of 4-20 mA, 24 V d.c. power supply to the transmitter, and output settings are divided, eliminating the need for bothersome calculations for percentage output.

The autostep function changes the output value in step form based on the setting from the divided output function. Changes can be sourced automatically every 10% or 25%. Its sweep function linearly increases or decreases the output and can be set to either 16 s or 32 s.

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...

---

AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...

---

QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...

---

Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...

---

High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...

---

Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...

---

Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...

---

Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...

---

Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...

---

Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...

---