DSP, Micros & Memory


Low jitter clock generator

6 April 2005 DSP, Micros & Memory

The new MAX9476 is a cost-effective, low-jitter, high-performance clock generator with an 8 kHz reference-clock input, making it an ideal timing solution for ADSL/VDSL central-office linecards, T1/E1, T3/E3, and telecom network systems, claims Maxim, its manufacturer. The device uses a 35,328 MHz crystal and an 8 kHz input reference clock to generate six identical, buffered LVTTL outputs at 35,328 MHz, which are all synchronised with the 8 kHz input clock. The device has an integrated VCXO and can track the input reference by ±100 ppm. The MAX9476 also provides a low-jitter 8 kHz clock output that is used as a reference clock for other parts of the system. The MAX9476 is available in a 24-pin TSSOP package and operates from a single supply over -40 to +85°C.

CST Electronics, +27 (0)11 452 0706

Electrocomp (Value Added Distributor), +27 (0)11 458 9000



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

General-purpose evaluation board
Altron Arrow DSP, Micros & Memory
Based on the 32-bit Arm Cortex-M7 S32K3 MCU in a 172 HDQFP package, the S32K3X4EVB-T172 offers dual cores configured in lockstep mode, ASIL D safety hardware, and HSE security engine.

Read more...
Unlock power efficiency with the new generation of ultra-low-power MCUs
DSP, Micros & Memory
STMicroelectronics has announced a one-hour webinar on its STM32U0, the company’s latest generation of entry-level, ultra-low-power MCUs.

Read more...
Using AMD HLS to supercharge your design performance
DSP, Micros & Memory
This workshop explores the power and capabilities of High-Level Synthesis (AMD Vitis HLS) to dramatically accelerate embedded software to hardware speeds.

Read more...
Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.

Read more...
Enhanced code protection for USB µC portfolio
Future Electronics DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.

Read more...
General-purpose MCU with RISC-V architecture
EBV Electrolink DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.

Read more...
8-bit MCU with I3C support
Avnet Silica DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.

Read more...
Banana Pi with NPU
CST Electronics AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...