Power Electronics / Power Management


Power factor corrector uses fast solid state switches

20 October 2004 Power Electronics / Power Management

The increasing complexity and sensitivity of electronic equipment calls for replacement of conventional static power factor correction (PFC) systems by dynamic PFC systems that react in realtime. Typical applications are found in welding equipment, industrial presses, and robots with electric drives.

Epcos has specially developed electronic thyristor modules of the TSM-LC series for these applications. In contrast with electromechanical switches, the thyristor modules are maintenance-free, free of wear and tear, and self-monitoring. Their typical response time of 7 ms deserve special mention. The series is intended for use in damped and undamped systems.

The TSM-LC 25 and TSM-LC 50 models can handle capacitive loads up to 25 and 50 kVar respectively at an operating voltage of 400 V. Various operating modes and data, such as power, voltage or error messages, are displayed by LEDs. With compact dimensions of only 157 x 200 x 180 mm, the modules can also be installed where space is at a premium. Screw terminals for connection to the AC line and capacitors ensure fast and easy assembly.

The TSM-C thyristor module has the same features as the TSM-LC types plus options for monitoring capacitor current and temperature. It also offers a separate test key for manual starting and an alarm relay with floating contacts. The load and/or capacitor bank can thus be disconnected if critical values are reached. Type TSM-AT has been specially developed for the higher voltage range from 525 to 690 V. Designed for capacitive loads up to 100 kVar, it also permits permanent monitoring of line voltage, capacitor current and module temperature. A built-in display shows the parameters set from a menu, values measured and error messages in plain text from a multilanguage selection. Error messages are stored, displayed as full text and evaluated.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Zero drift current shunt monitors
Altron Arrow Power Electronics / Power Management
The NCS21671 and NCV21671 from onsemi are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V.

Read more...
Schneider Electric partners with Drakenstein Municipality
Schneider Electric South Africa Power Electronics / Power Management
Drakenstein Municipality, situated in Paarl in the Western Cape, is one of the first distribution utilities globally to implement Schneider Electric’s green, SF6-free RM AirSeT switchgear with pure air technology and native digital connectivity.

Read more...
E-Mobility: navigate safety, interoperability and conformance
Concilium Technologies Power Electronics / Power Management
Although the concept of electric vehicles is not a new one, the market remains in its infancy, and is not well-regulated or fully operational. This presents a number of challenges for manufacturers throughout the EV and EVSE ecosystem.

Read more...
Webinar: Decarbonise with industrial drives
Power Electronics / Power Management
Infineon's TRENCHSTOP IGBT7 and CoolSiC technologies increase the efficiency of your industrial drive design, ultimately resulting in cost savings for you, and a more sustainable future for all.

Read more...
Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Compact PCB-mount SMPS
RS South Africa Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.

Read more...
AC-DC brick PSU
Conical Technologies Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.

Read more...
5 kW switching PSU range
Conical Technologies Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.

Read more...
Reliable charging range
Current Automation Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.

Read more...
Microchip expands its mSiC solutions
EBV Electrolink Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.

Read more...