Two-in-One THR male headers from Phoenix Contact mean that components with high numbers of pins - from 12 to 20 - can be integrated into the SMD process. Additionally, these male headers come in 56 mm wide reels, the industrial standard. These connectors are easily integrated into existing production processes, because they are compatible with the mounting process and require the same process equipment as that used for male headers with smaller numbers of pins.
The THR male headers are composed of two segments on the PCB. Each segment is packaged as tape-on-reel. The segments are narrower on the respective interior side walls. This leaves room for the housings to be mounted and placed in series, and without coming into contact. Following reflow soldering, the headers have the same properties as single-piece headers.
Two-in-One THR male connectors are available in 3,5 mm and 3,81 mm pitch, are pluggable both horizontally and vertically, in housings with side walls or screwed flanges, and with 12 to 20 pins.
For more information contact Sean Hadley, Phoenix Contact, 011 793 7121, [email protected]
Analogue, digital and power in one connector Spectrum Concepts
Interconnection
Adapting existing technology for RF applications, required the development of specific PCB stack ups and launch optimisations to achieve the differential crosstalk and return loss performance needed for frequencies up to 8 GHz.
Read more...PCB connectors for power systems Phoenix Contact
Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.
Read more...Digital link 40x faster than broadband Internet Hiconnex
Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.
Read more...Modular CAT7 inter-car-connection Hiconnex
Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.
Read more...SPE connector range Phoenix Contact
Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Compact power relays Future Electronics
Interconnection
The new HE-R Series power relays by Panasonic Industry are PCB-mounted relays for easy board assembly, with both two- and four-pole contact arrangement options.
Read more...High-density multicoax cable assembly RFiber Solutions
Interconnection
Withwave’s high speed and high-density Multicoax Cable Assemblies (WMX Series) provide a wide range of multiple coax connectors and flexible cable assemblies with a choice of 20, 40, 50, 67 or 110 GHz configurations.
Read more...Centralised distribution for M8 and M12 connectors Communica
Interconnection
Amphenol LTW’s distribution boxes facilitate efficient cable management, easy installation with pre-wired configuration, and provide a centralised distribution point for M8 and M12 connectors.
Read more...What is an RF connector? Spectrum Concepts
Editor's Choice Interconnection
If you look across the broader electromagnetic spectrum, the selection of the 3 kHz to 300 GHz frequency range for RF signals is a result of a balance between propagation characteristics, data transmission requirements, regulatory allocations, and the compatibility of electronic components and devices.
printer friendly version