Maxim's MAX5042 is a two-switch, clamped, PWM converter with integrated hot-swap controller. This is a unique device that the company says simplifies the design of small, high-performance, isolated power supplies by integrating high-side and low-side power MOSFETs with a hot-swap controller. The two-switch topology lowers the voltage stress on the power MOSFETs when compared to the commonly used ground-referenced, single-switch topology. This eliminates the reset winding, which optimises the design of planar isolation transformers, says Maxim.
It operates over an input voltage range of 20 to 76 V and is suited for stepping down a 48 V bus to lower voltages in telecom, networking, and server applications. The switching frequency can be externally set to over 500 kHz. The MAX5042 implements both flyback and forward converter topologies with voltage-mode or current-mode operation.
Power supplies designed with the MAX5042 are capable of up to 50 W output power at over 90% efficiencies according to the manufacturer.
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.
Read more...USB Type-C-powered controllers Future Electronics
Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.
Read more...Multicell battery monitoring Altron Arrow
Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.
Read more...Full telemetry in tiny DC-DC converters RS South Africa
Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.
Read more...Power IC supplies 1650 W EBV Electrolink
Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.
Read more...High-voltage step-down DC-DC converter Altron Arrow
Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.
Read more...High-voltage contactors RS South Africa
Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.
Read more...Chokes rated at 36 A RS South Africa
Power Electronics / Power Management
TDK Corporation has launched the EPCOS SurfIND series, a new range of current-compensated ring core double chokes for high currents and surface mounting.
Read more...RF arrestor provides robust protection RFiber Solutions
Power Electronics / Power Management
NexTek’s range of coaxial RF surge and lightning arrestors are designed and built to provide robust protection for any radio or coaxial RF transmission application.
Read more...Wide-Bandgap Developer Forum 2025
Power Electronics / Power Management
To give designers the ultimate in design flexibility, the entire range of WBG power semiconductors will be provided including discretes, modules, and highly integrated solutions ranging from 40 V to 700 V for GaN and 400 V to 3,3 kV for SiC.
printer friendly version