Analogue, Mixed Signal, LSI


1/8 to full-size DC-DC bricks

7 April 2004 Analogue, Mixed Signal, LSI

Power-One has expanded its isolated DC/DC brick product family with the addition of new through-hole, surface-mount, low-voltage/high-current, and bus converter models. Over 200 Distributed Power Architecture (DPA) compatible products are now available to provide up to 500 W and 100 A.

Single-output products, ranging from the 18 W E2S 1/8-brick to the 500 W FHS full-brick provide output voltages from 1,2 to 48 V d.c. Power-One's technical advances include the TXS series, the first 3/4-brick to provide a 100 A output. In addition, three new 12 V d.c output bus converters have been introduced including an 11 A ¼-brick, 25 A ½-brick, and 42 A full-brick.

Dual-output bricks, available in ¼, ½, and ¾ footprints, provide from 1,2 to 5 V d.c. with currents up to 25 A. The power-dense HHD series provides 100 W in a ½-brick package with a low profile height of only 12,7 mm. Additional performance features of the HHD Series include full-power operation to 55°C ambient with only 200 LFM cooling air without the addition of a heatsink.

Triple-output innovations include the 100 W half-brick HNT45ZEDB, which provides the functionality of an isolated brick and three POLs in one package. Three fully-regulated and isolated outputs can be programmed to provide from 0,75 to 5,15 V d.c. Combining these wide-range outputs with 0-15 A output-loading capabilities provides the HNT45ZEDB with the applications flexibility of an entire series.

Typical features include industry-leading efficiencies and power densities, a comprehensive selection of input-voltage ranges, 1500 V d.c. input-to-output isolation, no minimum load operation, and low conducted and radiated EMI. Typical interface and protection features include remote on/off, remote sense, output overcurrent, output overvoltage, and overtemperature. Selected models feature One-SMarT surface-mountable packages.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...
2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...
Dual-channel ADC for RF applications
RFiber Solutions Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.

Read more...
Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...
Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...