High-performance low VCEsat transistors use only 2,6 mm2 of area
18 June 2003
Analogue, Mixed Signal, LSI
Royal Philips Electronics has announced a significant advancement for its innovative Low VCEsat (BISS) transistor family. Pushing performance boundaries, Philips claims it is the first semiconductor company to offer the market BISS transistors in the 1612-sized SOT666/SS-Mini package.
Capable of collector currents up to 2 A, the PBSS4240V and PBSS5240V offer best-in-class performance, delivering increased capabilities that require 41% less PCB space compared to other well-known 1 A devices in SOT23, says Philips. The new transistors in SOT666 occupy only 1,6 x 1,6 mm of PCB area. These devices can also offer extremely low collector-emitter resistance (RCEsat = 190 mΩ) and due to less heat generation, can improve the efficiency of entire circuits.
SOT666 BISS transistors target power management applications including DC-DC conversion, supply line switching and LCD back-lighting in portable electronic goods including mobile phones and laptops. The new BISS transistors can also drive LEDs, relays and buzzers and are a cost-effective alternative to MOSFETs in specific applications, according to the company.
For more information contact Avnet Kopp, 011 809 6100, [email protected], www.avnet.co.za
Further reading:
A new era in modular I/O solutions
Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...
High voltage instrument op-amp
iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...
High-speed SAR ADC simplifies design
Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...
2-wire quad voltage output DAC
Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...
Dual-channel ADC for RF applications
RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...
Infineon launches Edge Ai software solution
Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...
16-bit voltage output denseDAC
Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...
AFE enables the software-defined factory
Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...
Precision voltage reference
Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...
Microphones enable low-power always-on state
Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...
printer friendly version